Dyno 348 horse/279 torque @ 14 psi on Rtek 2.1
#1
Dyno 348 horse/279 torque @ 14 psi on Rtek 2.1
Went to a dyno day on Saturday and with the new injectors and different turbo I wanted to see what it would do @14psi. The first run was at 10psi then the rest was at 13-14psi. There is probably more in the setup, but I'm just using a map that I made from using other peoples base maps and from reading around the forum. The AFR's where around the mid 11's. I still have to get around to leaning it out some around 4700 rpm and richening it up a few points at around 5400 rpm
Delphi 1000cc x2 injectors From KGparts
Greddy/Nippon Denso 720cc x2
Masterpower T60 .96 A/R
HKS cast manifold
Tial 38mm wastegate
Delphi 1000cc x2 injectors From KGparts
Greddy/Nippon Denso 720cc x2
Masterpower T60 .96 A/R
HKS cast manifold
Tial 38mm wastegate
Trending Topics
#8
Pobody's Nerfect
iTrader: (3)
Join Date: Sep 2005
Location: Worcester Massachusetts
Posts: 2,326
Likes: 0
Received 0 Likes
on
0 Posts
wow i am really impressed that you made those numbers on a stock port at only 14 PSI. I will be tunning within the next couple months on a pretty much identical setup so now i can hopefully expect something along the lines of this.
#13
From what I can tell its accurate. I'm running a Walbro with a Aeromotive FPR. I'm happy with it right now and if I want more then I'm going to have to figure something out with the injectors. I ride around with just 10-11 psi anyways and its more than fast enough to have fun with.
Maybe even adding some kind of meth/water injection could be in the future.
#23
rotorican85
iTrader: (9)
Join Date: Sep 2005
Location: en el culo de texas...
Posts: 900
Likes: 0
Received 0 Likes
on
0 Posts
nice numbers. almost same setup i am using except i got a turbonetics 62-1, .81 a/r also.
last dyno session i clocked 348 @11psi before some engine gremlins reared their ugly face. but mine is street ported and 850/1600 injectors. looking to go back soon and strat turning up the boost on mine!! 400+ on pump is my goal and +/- 525 on race mix.
but on stock ports, those are nice numbers!! congrats.
last dyno session i clocked 348 @11psi before some engine gremlins reared their ugly face. but mine is street ported and 850/1600 injectors. looking to go back soon and strat turning up the boost on mine!! 400+ on pump is my goal and +/- 525 on race mix.
but on stock ports, those are nice numbers!! congrats.