BNR turbo dyno sheets please.
#304
destroy, rebuild, repeat
iTrader: (1)
despite a slipping clutch and coolant seal leak slowly getting worse and worse, i got iit dynoed today with more boost. this is with the greddy profec II.
EBC set to 9 psi: 284 whp
started to turn it up, but seemed to run out of fuel. It was getting pretty lean up top, and htis is with the correction maxed at +37% on the rtek at 5.5k+ rpm
this is about 13 psi: 307 whp
im not exactly sure what psi this was at, because the rtek was reading 2 psi lower than my boost gauge which read about 13 psi. and i think i have the gain set too high on the profec, cause the boost seems to overshoot. but yeah i definitely need more fuel before turning up the boost any more
and a video of the last run:
http://www.youtube.com/watch?v=GuvRcg2tRIY
EBC set to 9 psi: 284 whp
started to turn it up, but seemed to run out of fuel. It was getting pretty lean up top, and htis is with the correction maxed at +37% on the rtek at 5.5k+ rpm
this is about 13 psi: 307 whp
im not exactly sure what psi this was at, because the rtek was reading 2 psi lower than my boost gauge which read about 13 psi. and i think i have the gain set too high on the profec, cause the boost seems to overshoot. but yeah i definitely need more fuel before turning up the boost any more
and a video of the last run:
http://www.youtube.com/watch?v=GuvRcg2tRIY
Last edited by gxl90rx7; 03-10-08 at 06:23 PM.
#307
FD pro licensed driver
iTrader: (3)
Join Date: Feb 2006
Location: Renton/Bellevue/Seattle WA
Posts: 2,897
Likes: 0
Received 2 Likes
on
2 Posts
Is it just me .... or are the numbers on the BNRturbos website for rwhp somewhat exaggerated? Maybe if the engine was built, ported, and tuned perfectly peoples numbers would match those on the site?
Stage 4s putting out 353 rwhp
Stage 3s barely putting out 307...
Is it just that people aren't doing their tuning and such right, or at the numbers they should reach maybe rounded up a little high?
Not calling anyone out here what so ever, just wondering why no one is reaching or even getting close to what they have been known to do... (power wise)
Maybe the 2 or 3 more psi, and not having the coolant leak will help jump the hp up by 50 on his stage 3?
(again I am not saying that anything is wrong with the turbos, I am just doing research. I was REALLY interested in getting a stage 2, and putting down 300 rwhp, but it looks like that's almost impossible with a stage 2, seeing how stage 3s are barely doing it..)
Stage 4s putting out 353 rwhp
Stage 3s barely putting out 307...
Is it just that people aren't doing their tuning and such right, or at the numbers they should reach maybe rounded up a little high?
Not calling anyone out here what so ever, just wondering why no one is reaching or even getting close to what they have been known to do... (power wise)
Maybe the 2 or 3 more psi, and not having the coolant leak will help jump the hp up by 50 on his stage 3?
(again I am not saying that anything is wrong with the turbos, I am just doing research. I was REALLY interested in getting a stage 2, and putting down 300 rwhp, but it looks like that's almost impossible with a stage 2, seeing how stage 3s are barely doing it..)
Last edited by TweakGames; 03-11-08 at 12:28 AM.
#310
RotoriousRx7
Join Date: Oct 2005
Location: goodlettsville,tennessee 37072
Posts: 1,236
Likes: 0
Received 0 Likes
on
0 Posts
well i have been wondering that too like how no one has met the power that they have? i have a big street port and small t urbo and its fun and fast 8.0's in 1/8th so its a very streetable car, but i going for 400 ish rwhp and nead to know if the stage four will put me there?
#311
everything will be okay
iTrader: (15)
Join Date: Oct 2005
Location: Cedar Rapids, IA
Posts: 1,650
Likes: 0
Received 0 Likes
on
0 Posts
Is it just me .... or are the numbers on the BNRturbos website for rwhp somewhat exaggerated? Maybe if the engine was built, ported, and tuned perfectly peoples numbers would match those on the site?
Stage 4s putting out 353 rwhp
Stage 3s barely putting out 307...
Is it just that people aren't doing their tuning and such right, or at the numbers they should reach maybe rounded up a little high?
Not calling anyone out here what so ever, just wondering why no one is reaching or even getting close to what they have been known to do... (power wise)
Maybe the 2 or 3 more psi, and not having the coolant leak will help jump the hp up by 50 on his stage 3?
(again I am not saying that anything is wrong with the turbos, I am just doing research. I was REALLY interested in getting a stage 2, and putting down 300 rwhp, but it looks like that's almost impossible with a stage 2, seeing how stage 3s are barely doing it..)
Stage 4s putting out 353 rwhp
Stage 3s barely putting out 307...
Is it just that people aren't doing their tuning and such right, or at the numbers they should reach maybe rounded up a little high?
Not calling anyone out here what so ever, just wondering why no one is reaching or even getting close to what they have been known to do... (power wise)
Maybe the 2 or 3 more psi, and not having the coolant leak will help jump the hp up by 50 on his stage 3?
(again I am not saying that anything is wrong with the turbos, I am just doing research. I was REALLY interested in getting a stage 2, and putting down 300 rwhp, but it looks like that's almost impossible with a stage 2, seeing how stage 3s are barely doing it..)
man, dont say that. your going to get me bummed out before i even get my stage 2 back from bryan. which, by the way, should be here within the week....
im hoping to put down around 315ish, which bryan said was do-able with the stage 2.
#312
destroy, rebuild, repeat
iTrader: (1)
true.. my numbers seem to be very similar with 95nracer's. we both have stockport s4 blocks .. and my dynos above were on a slipping clutch and a blown coolant seal affecting compression. and on the 13 psi run, the boost actually dropped a couple psi near redline b/c i had the gain set too high on the boost controller
Im pretty sure mine will hit at least 340 or so at 14 psi steady on the new engine, with the boost controller setup correctly
Im pretty sure mine will hit at least 340 or so at 14 psi steady on the new engine, with the boost controller setup correctly
#313
I suppose I've done things a little backwards. The pod is on my to do list. My tuner told me today a FMIC could make another 30-40hp. He could advance the timing a little and go a little harder on the tune.
I'll be very happy once / if the car makes 300rwhp.
Anyone here selling a second hand Greddy FMIC kit?
I'll be very happy once / if the car makes 300rwhp.
Anyone here selling a second hand Greddy FMIC kit?
PSI Parts sell a copy of the Greddy kit, you could just buy the piping for it off them & get a good quality tube & fin intercooler for it.
#314
SLEEPER
iTrader: (3)
Is it just me .... or are the numbers on the BNRturbos website for rwhp somewhat exaggerated? Maybe if the engine was built, ported, and tuned perfectly peoples numbers would match those on the site?
Stage 4s putting out 353 rwhp
Stage 3s barely putting out 307...
Is it just that people aren't doing their tuning and such right, or at the numbers they should reach maybe rounded up a little high?
Not calling anyone out here what so ever, just wondering why no one is reaching or even getting close to what they have been known to do... (power wise)
Maybe the 2 or 3 more psi, and not having the coolant leak will help jump the hp up by 50 on his stage 3?
(again I am not saying that anything is wrong with the turbos, I am just doing research. I was REALLY interested in getting a stage 2, and putting down 300 rwhp, but it looks like that's almost impossible with a stage 2, seeing how stage 3s are barely doing it..)
Stage 4s putting out 353 rwhp
Stage 3s barely putting out 307...
Is it just that people aren't doing their tuning and such right, or at the numbers they should reach maybe rounded up a little high?
Not calling anyone out here what so ever, just wondering why no one is reaching or even getting close to what they have been known to do... (power wise)
Maybe the 2 or 3 more psi, and not having the coolant leak will help jump the hp up by 50 on his stage 3?
(again I am not saying that anything is wrong with the turbos, I am just doing research. I was REALLY interested in getting a stage 2, and putting down 300 rwhp, but it looks like that's almost impossible with a stage 2, seeing how stage 3s are barely doing it..)
#317
mhhh
iTrader: (21)
I think the numbers are right. I know that I could hit 350whp with my stage 3 if I had everything built properly and tuned on a good day. Hell, i got it tuned at 11-12 psi, 90 degrees outside, humid as hell, stock ic blocking air flow and blowing HOT air, a 120k stock engine, and a slightly slipping clutch and reached 250whp. Surely, with those problems corrected, 350 would be do-able.
#319
IFO Forced Induction Slo
iTrader: (3)
Join Date: Mar 2004
Location: Houston
Posts: 1,315
Likes: 0
Received 0 Likes
on
0 Posts
Is it just me .... or are the numbers on the BNRturbos website for rwhp somewhat exaggerated? Maybe if the engine was built, ported, and tuned perfectly peoples numbers would match those on the site?
Stage 4s putting out 353 rwhp
Stage 3s barely putting out 307...
Is it just that people aren't doing their tuning and such right, or at the numbers they should reach maybe rounded up a little high?
Not calling anyone out here what so ever, just wondering why no one is reaching or even getting close to what they have been known to do... (power wise)
Maybe the 2 or 3 more psi, and not having the coolant leak will help jump the hp up by 50 on his stage 3?
(again I am not saying that anything is wrong with the turbos, I am just doing research. I was REALLY interested in getting a stage 2, and putting down 300 rwhp, but it looks like that's almost impossible with a stage 2, seeing how stage 3s are barely doing it..)
Stage 4s putting out 353 rwhp
Stage 3s barely putting out 307...
Is it just that people aren't doing their tuning and such right, or at the numbers they should reach maybe rounded up a little high?
Not calling anyone out here what so ever, just wondering why no one is reaching or even getting close to what they have been known to do... (power wise)
Maybe the 2 or 3 more psi, and not having the coolant leak will help jump the hp up by 50 on his stage 3?
(again I am not saying that anything is wrong with the turbos, I am just doing research. I was REALLY interested in getting a stage 2, and putting down 300 rwhp, but it looks like that's almost impossible with a stage 2, seeing how stage 3s are barely doing it..)
Don't worry TweakGames, 353 at 13 psi is pretty good. The 400+ hp shown on their site is from a built Cosmo engine.
The reason why I didn't go higher was just a few days before I went, my buddy broke a rear iron at ~350hp. Let it be known that my buddy broke the weakest type of rear iron out there, the one without the oil pedistal triangle brace and small casting around the dowel. Before I knew what was in my motor, I was a little scared of breaking it so I told Chris at RX-7.com that I would be happy with 350+ hp and thats where he stopped.
Now that I am back home, I have researched the 3 types of rear irons circulating and I have found (thanks to Kevin Landers research) that I have the strongest rear iron available for the S5 RX-7. I will be heading back to Dallas AGAIN, in a couple of weeks to be tuned at higher boost.
#323
FD pro licensed driver
iTrader: (3)
Join Date: Feb 2006
Location: Renton/Bellevue/Seattle WA
Posts: 2,897
Likes: 0
Received 2 Likes
on
2 Posts
I think, (i'm no expert) that the clipped exhaust wheel allows less backpressure caused by the turbo, allowing more exhaust to flow past the turbo with less restriction. Therefor allowing you to have more power at higher RPM from the less restriction.