273whp stock turbo
#2
U.S. Army Recon 93-04
Join Date: Feb 2007
Location: Seminole,Fl
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Why such large injectors, no fuel pump to push them?
Why so much fuel at only 12psi? its way too rich near redline..?
sounds like over kill..whats the A/F ratios?
Why is the pressure dropping to 6 ?
something a miss here..your input?
Why so much fuel at only 12psi? its way too rich near redline..?
sounds like over kill..whats the A/F ratios?
Why is the pressure dropping to 6 ?
something a miss here..your input?
#6
Crash Auto?Fix Auto.
iTrader: (3)
to the OP - that sounds like really good power for that boost level and mods...I've never seen a stock turbo FC make it over the 260whp mark in person, and at 12psi, thats almost unbelivable. Post the graph please Also, the TQ is MONTSTROUS. The last 250whp stock turbo FC I saw put down a little over 200TQ IIRC...so thats pretty wild.
#7
U.S. Army Recon 93-04
Join Date: Feb 2007
Location: Seminole,Fl
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
The small DP size and the fact he is still running a cat..that would be a good cause for the PSI to drop off like that.?
unless I was reading something wrong..
wonder why no graph was posted with it....
unless I was reading something wrong..
wonder why no graph was posted with it....
Trending Topics
#8
#9
car has a walbro 255lph.
also running 9s in leading and trail. the car has no cat...a racing beat presilencer instead.
and yes my injectors are overkill, nothing wrong with that. AFR was rich in the lower rpm ~10.9 and lean in the upper ~11.6. i smoothed out the fuel ratio after the dyno run.
heres a crappy pic of the graph. notice the motor didn't go all the way to 7...the turbo is choking it pretty hard up there.
also running 9s in leading and trail. the car has no cat...a racing beat presilencer instead.
and yes my injectors are overkill, nothing wrong with that. AFR was rich in the lower rpm ~10.9 and lean in the upper ~11.6. i smoothed out the fuel ratio after the dyno run.
heres a crappy pic of the graph. notice the motor didn't go all the way to 7...the turbo is choking it pretty hard up there.
#13
U.S. Army Recon 93-04
Join Date: Feb 2007
Location: Seminole,Fl
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Nice curve! why is it over 1 year old..?
Porting the turbo housings and manifold, would this allow for any increase in PSI at the higher rpm level?
Or is it a waste of time?
I built 2 other engines almost exactly the same as yours, except extensive porting of the manifold and housings..Just curious for my own notes..
Porting the turbo housings and manifold, would this allow for any increase in PSI at the higher rpm level?
Or is it a waste of time?
I built 2 other engines almost exactly the same as yours, except extensive porting of the manifold and housings..Just curious for my own notes..
#15
Leave my avatar alone!!!
iTrader: (8)
Join Date: Feb 2005
Location: Spartanburg SC
Posts: 1,656
Likes: 0
Received 0 Likes
on
0 Posts
are you runing a boost controller or just wastegate? just wondering couse I got an JDM S5 with large street on secondaries and wery mild on the primary ports also full 3 exhoust and a front mount with intake and a Profec B.
#20
The Doctor
iTrader: (1)
Join Date: Apr 2008
Location: Cedar Rapids, IA
Posts: 1,185
Likes: 0
Received 0 Likes
on
0 Posts
Heh, well considering were actually in the middle of a cold front right now, i guess thats always possible. Was 40 degrees out the other night, thats FREEZING here... But I guess it is good dyno'ing weather...
Yeah yeah, were not use to the cold weather down here.
Yeah yeah, were not use to the cold weather down here.
#21
U.S. Army Recon 93-04
Join Date: Feb 2007
Location: Seminole,Fl
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
89 octane..whats your secret?
I have a turbo piston car and I get detonation on 93 octane @ 15 psi. I added a larger intercooler that allowed me to run up 22 psi, after that I have to run 110, mixed with the 93, that allows me to run up to 32 psi..with no blown parts..
Do you think you would get less power with a higher octane?, since you seem to running pretty good on the lower stuff?
I am still taking notes, thank you for being so open and honest..rare traits to have these days..My hat is off to you sir!
I have a turbo piston car and I get detonation on 93 octane @ 15 psi. I added a larger intercooler that allowed me to run up 22 psi, after that I have to run 110, mixed with the 93, that allows me to run up to 32 psi..with no blown parts..
Do you think you would get less power with a higher octane?, since you seem to running pretty good on the lower stuff?
I am still taking notes, thank you for being so open and honest..rare traits to have these days..My hat is off to you sir!
#22
U.S. Army Recon 93-04
Join Date: Feb 2007
Location: Seminole,Fl
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
I had ice on my RX7 this morning and yesterday, damn and I live 1 mile from Clearwater Beach..I moved down here to get away from the snow/cold..
Global Warming.. yeah sure it is!!!
Global Warming.. yeah sure it is!!!