The Official FC Wheel Fitment Thread
#801
Rotary Enthusiast
iTrader: (2)
Join Date: May 2005
Location: E-L Netherlands
Posts: 1,165
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the good response
i come from holland, and here it is really hard to find some staggered wheels for a reasonable price!! almost everything has to come overseas and that's way too expensive!
the wheel i bought are barracuda velvet's, wich are replicas of the oxigin lexor.
the lexor costs about 900 dollars for a wheel but these cost just 400 or so.
i cant wait to have them heren
i come from holland, and here it is really hard to find some staggered wheels for a reasonable price!! almost everything has to come overseas and that's way too expensive!
the wheel i bought are barracuda velvet's, wich are replicas of the oxigin lexor.
the lexor costs about 900 dollars for a wheel but these cost just 400 or so.
i cant wait to have them heren
#803
Lives on the Forum
Originally Posted by Liquid Anarchy
how about 16x7 28mm offset w/ 225/50/16 all around on an FC?
Another set of JDM imported wheels?
Those dimensions are not very easy to find in the U.S.
-Ted
#805
MODERATOR
iTrader: (137)
[QUOTE=Furb]Thanks for all the help, i finally ordered me some wheels today!
18x8,5 ET25 front and 18x9,5 ET25 rear...
reTed i am getting these same 18in wheels also but i dont get his sizes he put on the post
i want the wheels to sit inside the wheel well ...i am not a fan of flush with the fenders or stick outs
as a matter of fact the way those wheels look in the car right now is what i want
buti cant trust a photoshop pic
any help will be appreciated
offset:
max tire size front and rear:
i ask you because you seem like the go to guy
18x8,5 ET25 front and 18x9,5 ET25 rear...
reTed i am getting these same 18in wheels also but i dont get his sizes he put on the post
i want the wheels to sit inside the wheel well ...i am not a fan of flush with the fenders or stick outs
as a matter of fact the way those wheels look in the car right now is what i want
buti cant trust a photoshop pic
any help will be appreciated
offset:
max tire size front and rear:
i ask you because you seem like the go to guy
#807
Rotary Enthusiast
iTrader: (2)
Join Date: May 2005
Location: E-L Netherlands
Posts: 1,165
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by El Nene 7
reTed i am getting these same 18in wheels also but i dont get his sizes he put on the post
i want the wheels to sit inside the wheel well ...i am not a fan of flush with the fenders or stick outs
as a matter of fact the way those wheels look in the car right now is what i want
buti cant trust a photoshop pic
any help will be appreciated
offset:
max tire size front and rear:
i ask you because you seem like the go to guy
i want the wheels to sit inside the wheel well ...i am not a fan of flush with the fenders or stick outs
as a matter of fact the way those wheels look in the car right now is what i want
buti cant trust a photoshop pic
any help will be appreciated
offset:
max tire size front and rear:
i ask you because you seem like the go to guy
what's not to get
i got the advice for the wheels from ReTed also...
i followed his list on http://fc3spro.com/TECH/MODS/RT/rims.htm and asked advice on this forum many times!
im getting a 225/40/18 tiren in front and 255/35/18 in the rear...
according to Reted this wont give any problems with fitment!
if you want the wheels to go a little deeper inside the fenders just use a higher offset...
Thread
Thread Starter
Forum
Replies
Last Post
diabolical1
2nd Generation Specific (1986-1992)
30
01-30-16 05:50 AM