Will 17X9.5 +30MM fit on fd ? yes I searched
#1
Junior Member
Thread Starter
Join Date: Oct 2011
Location: WINDSOR CANADA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Will 17X9.5 +30MM fit on fd ? yes I searched
Yes I did do a search and looked at the wheel fit calculator but still can't figure it out lol.. I have a chance to get a set of ROTA PR45 in this size with tires for a good deal but I want to know if they will fit on the car ?
I am willing to roll the stock fenders and I know these are not ideal but the price is almost too good to pass up.
I am located in canada and will be traveling to the states to get these so I really only have one shot.
I am mainly concerned about them fitting on the front.
Thanks guys.
I am willing to roll the stock fenders and I know these are not ideal but the price is almost too good to pass up.
I am located in canada and will be traveling to the states to get these so I really only have one shot.
I am mainly concerned about them fitting on the front.
Thanks guys.
#3
Junior Member
Thread Starter
Join Date: Oct 2011
Location: WINDSOR CANADA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, that fronts are what is killing me, from the calculator it gives me -0.57 in for clearance up front which I am assuming I would have to roll the front fenders out 0.57 inches to have clearance.
#4
Do a barrel roll!
iTrader: (4)
This isnt exactly what you are asking obviously, but here is a member running 9.5 +38 up front, and even at that he is stretching a 225 on it to assure clearance. Yours will be 8mm further outboard, but should still be ok with a 225. Might need to play with alignment/camber settings. IMO unless you really love that look or the wheels, Id pass for something that fits and you can run a good size tire on.
https://www.rx7club.com/suspension-wheels-tires-brakes-20/rota-grids-my-fd-892247/
https://www.rx7club.com/suspension-wheels-tires-brakes-20/rota-grids-my-fd-892247/
#5
Junior Member
Thread Starter
Join Date: Oct 2011
Location: WINDSOR CANADA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
This isnt exactly what you are asking obviously, but here is a member running 9.5 +38 up front, and even at that he is stretching a 225 on it to assure clearance. Yours will be 8mm further outboard, but should still be ok with a 225. Might need to play with alignment/camber settings. IMO unless you really love that look or the wheels, Id pass for something that fits and you can run a good size tire on.
https://www.rx7club.com/showthread.php?t=892247
https://www.rx7club.com/showthread.php?t=892247
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM