Will 17X9.5 +30MM fit on fd ? yes I searched
Yes I did do a search and looked at the wheel fit calculator but still can't figure it out lol.. I have a chance to get a set of ROTA PR45 in this size with tires for a good deal but I want to know if they will fit on the car ?
I am willing to roll the stock fenders and I know these are not ideal but the price is almost too good to pass up. I am located in canada and will be traveling to the states to get these so I really only have one shot. I am mainly concerned about them fitting on the front. Thanks guys. |
Rears will fit with a normal size tire (255) and a good roll, but in the front that offset is not too friendly. Itll "work" with a smaller tire and some aggressive fender work, but its not ideal.
|
Thanks, that fronts are what is killing me, from the calculator it gives me -0.57 in for clearance up front which I am assuming I would have to roll the front fenders out 0.57 inches to have clearance.
|
This isnt exactly what you are asking obviously, but here is a member running 9.5 +38 up front, and even at that he is stretching a 225 on it to assure clearance. Yours will be 8mm further outboard, but should still be ok with a 225. Might need to play with alignment/camber settings. IMO unless you really love that look or the wheels, Id pass for something that fits and you can run a good size tire on.
https://www.rx7club.com/suspension-wheels-tires-brakes-20/rota-grids-my-fd-892247/ |
Originally Posted by Rxmfn7
(Post 11089721)
This isnt exactly what you are asking obviously, but here is a member running 9.5 +38 up front, and even at that he is stretching a 225 on it to assure clearance. Yours will be 8mm further outboard, but should still be ok with a 225. Might need to play with alignment/camber settings. IMO unless you really love that look or the wheels, Id pass for something that fits and you can run a good size tire on.
https://www.rx7club.com/showthread.php?t=892247 |
All times are GMT -5. The time now is 06:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands