Wanting fitment pics for FD with 10" wide fronts.
^^
Thanks Carlos. So, FWIW, mine at +50 rub the trailing arm. The 5mm spacer I bought from Fritz was I believe made by CCW for an RX7, so SOMEBODY else's CCW's must've rubbed too.
Thanks Carlos. So, FWIW, mine at +50 rub the trailing arm. The 5mm spacer I bought from Fritz was I believe made by CCW for an RX7, so SOMEBODY else's CCW's must've rubbed too.
Joined: Mar 2002
Posts: 1,619
Likes: 502
From: The Elysian Fields (Texas)
Thread Starter
Joined: Sep 2004
Posts: 4,229
Likes: 1
From: gilbert, arizona
Yeah I'd really like to see 18x10" +25 up front, I already did a slight pull on my front fenders. This is why i want to see +25 up front:
pretty much dead set on these and the only decent size they come in 18x10 +25
pretty much dead set on these and the only decent size they come in 18x10 +25
10.5 +50ish prob to much poke and stretch for most.
if you remind me this weekend i can throw a 25mm spacer on my vs-xx thatll match how much a 10+25 sticks out.
if you were in tucson, youd be more then welcome to come test it out. but i think youl need wide fenders for sure.
add +25 to these fronts
if you remind me this weekend i can throw a 25mm spacer on my vs-xx thatll match how much a 10+25 sticks out.
if you were in tucson, youd be more then welcome to come test it out. but i think youl need wide fenders for sure.
add +25 to these fronts
they dont have the stickers on them, but they are 10.5 wide
they stick a tad bit out more (if not equal) then my vsxx which sits at 9"+38. if my math is correct that puts the 10.5 rims around 50ish offset to match the same outside edge of the wheel
they stick a tad bit out more (if not equal) then my vsxx which sits at 9"+38. if my math is correct that puts the 10.5 rims around 50ish offset to match the same outside edge of the wheel
