Varrstoen TE37 REPLICAS wow..........
#1
Varrstoen TE37 REPLICAS wow..........
Hi guys,
I have a friend who released a TE37 Replica. Figured with all the budget spending going on I might as well jump onto the bandwagon since I can get you guys a decent deal on these.
RETAIL: $1000.00 PLUS SHIPPING,
CLICK HERE FOR OUR SUBFORUM AD:
https://www.rx7club.com/showthread.p...56#post9896956
Varrstoen
ONLY THING I HAVE IS
18x9 +15 5x114.3
Weight ~ 20lbs.
18x9 +15 4x114.3: PHONE DIAL FC'S UNITE.......
Weight ~ 20lbs.
Matte Black or Matte Bronze
A little Stretch, a little camber and these are a SWEET FD or FC fitment.
Thanks, Rishie
I have a friend who released a TE37 Replica. Figured with all the budget spending going on I might as well jump onto the bandwagon since I can get you guys a decent deal on these.
RETAIL: $1000.00 PLUS SHIPPING,
CLICK HERE FOR OUR SUBFORUM AD:
https://www.rx7club.com/showthread.p...56#post9896956
Varrstoen
ONLY THING I HAVE IS
18x9 +15 5x114.3
Weight ~ 20lbs.
18x9 +15 4x114.3: PHONE DIAL FC'S UNITE.......
Weight ~ 20lbs.
Matte Black or Matte Bronze
A little Stretch, a little camber and these are a SWEET FD or FC fitment.
Thanks, Rishie
#10
JefeFD/Jordan Innovations
Haha, I'm a dealer for Varrstoen as well ~ as established as you are in the Rx7 community Rishie you should do very well with these Great price as well!
I will be doing 19x9.5 / 10.5 et22 on my FD, and probably a set of 18x9.5 / 10.5 CE28's when they get here. Test fits show good (aggressive) fitment on stock fenders with ~2* of camber and roll/minor pull.
I will be doing 19x9.5 / 10.5 et22 on my FD, and probably a set of 18x9.5 / 10.5 CE28's when they get here. Test fits show good (aggressive) fitment on stock fenders with ~2* of camber and roll/minor pull.
#11
Sweet, ya this is just a test bed for the product and the Rotary brothers are the only ones who will get the benefit from me directly. We are 99% wholesale only so let me know if you need anything. We distribute a lot of good lines and can always use another dealer down south. I might be able to even work something out for you on Varrstoen due to the quantity we will be stocking in NorCal.
Pallets should be landing next week.
Thanks, Rishie
Pallets should be landing next week.
Thanks, Rishie
#12
Haha, I'm a dealer for Varrstoen as well ~ as established as you are in the Rx7 community Rishie you should do very well with these Great price as well!
I will be doing 19x9.5 / 10.5 et22 on my FD, and probably a set of 18x9.5 / 10.5 CE28's when they get here. Test fits show good (aggressive) fitment on stock fenders with ~2* of camber and roll/minor pull.
I will be doing 19x9.5 / 10.5 et22 on my FD, and probably a set of 18x9.5 / 10.5 CE28's when they get here. Test fits show good (aggressive) fitment on stock fenders with ~2* of camber and roll/minor pull.
#14
JefeFD/Jordan Innovations
Sure ~ this is at full droop (meaning at least 1* of positive camber) on stock fenders. Remember, each degree of camber can pull it in 1/4" - 1/2" ~ these will fit if you're not lame.
... and the rears fit no problem. A little camber and a fender roll, very minor pull req'd. Again, pic is at full droop.
Should look great! Waiting on more stock to arrive.
... and the rears fit no problem. A little camber and a fender roll, very minor pull req'd. Again, pic is at full droop.
Should look great! Waiting on more stock to arrive.
Thread
Thread Starter
Forum
Replies
Last Post
renjiv2
3rd Generation Specific (1993-2002)
57
01-25-24 03:34 AM
dqpd2003
1st Generation Specific (1979-1985)
5
09-23-15 03:02 PM