Varrstoen TE37 REPLICAS wow..........
 

Hi guys,

I have a friend who released a TE37 Replica. Figured with all the budget spending going on I might as well jump onto the bandwagon since I can get you guys a decent deal on these.

RETAIL: $1000.00 PLUS SHIPPING,

CLICK HERE FOR OUR SUBFORUM AD:
https://www.rx7club.com/showthread.p...56#post9896956

Varrstoen

ONLY THING I HAVE IS

18x9 +15 5x114.3
Weight ~ 20lbs.

18x9 +15 4x114.3: PHONE DIAL FC'S UNITE.......
Weight ~ 20lbs.

Matte Black or Matte Bronze

A little Stretch, a little camber and these are a SWEET FD or FC fitment.

http://i10.photobucket.com/albums/a1...G_5203500W.jpg
http://i10.photobucket.com/albums/a1...G_5220500W.jpg
http://i10.photobucket.com/albums/a1...G_5231500W.jpg

Thanks, Rishie

Rishie make sure to post these over on rx8club.com as I'm sure a couple of people would pick these up

Yup just did it. I can't wait to see some of these on FC's. If my FC wasn't widebody I'd grab these and put my Works in the closet for a while. I'm sure we'll see more of them on FD's though.

Too bad they don't have them with a higher offset. Would make a nice street rim for my car after painting them silver >.<

thewird

They offer 18x8 +35 which is a good street fitment for you. They are not concave however.

CUSTOM POWDER COATED
http://i10.photobucket.com/albums/a1...G_5142500W.jpghttp://i10.photobucket.com/albums/a1...G_4466500W.jpg
http://i10.photobucket.com/albums/a1...G_4529500W.jpghttp://i10.photobucket.com/albums/a1...G_5074500W.jpg

What is concave?

thewird

Here's the 18x8 +35 Flat Face:

http://i10.photobucket.com/albums/a1...G_5328500W.jpg

Could I get that in a 9" width?

thewird

Haha, I'm a dealer for Varrstoen as well ~ as established as you are in the Rx7 community Rishie you should do very well with these :) Great price as well!

I will be doing 19x9.5 / 10.5 et22 on my FD, and probably a set of 18x9.5 / 10.5 CE28's when they get here. Test fits show good (aggressive) fitment on stock fenders with ~2* of camber and roll/minor pull.

Sweet, ya this is just a test bed for the product and the Rotary brothers are the only ones who will get the benefit from me directly. We are 99% wholesale only so let me know if you need anything. We distribute a lot of good lines and can always use another dealer down south. I might be able to even work something out for you on Varrstoen due to the quantity we will be stocking in NorCal.

Pallets should be landing next week.

Thanks, Rishie

Do you have any pics of the 19s test fitted on the FD?

yes please

Sure ~ this is at full droop (meaning at least 1* of positive camber) on stock fenders. Remember, each degree of camber can pull it in 1/4" - 1/2" ~ these will fit if you're not lame.

https://public.bay.livefilestore.com...A/IMG_0635.jpg

https://public.bay.livefilestore.com...A/IMG_0636.jpg

https://public.bay.livefilestore.com...A/IMG_0639.jpg

... and the rears fit no problem. A little camber and a fender roll, very minor pull req'd. Again, pic is at full droop.
https://public.bay.livefilestore.com...g/IMG_0640.jpg

https://public.bay.livefilestore.com...g/IMG_0641.jpg

https://public.bay.livefilestore.com...Q/IMG_0642.jpg


Should look great! Waiting on more stock to arrive.

Awesome, thanks Jordan! Are your fronts rolled or pulled at all? What size tires are you looking to run? The rear looks pretty good, maybe even a little spacer :egrin:

Nice

wow those are the best replica's I've come across

I have a set of these in black if anyone is interested $750 includes tires!