Understanding wheel charts???
#1
Understanding wheel charts???
this chart is more technical that what i'm used too. i dont know where to start really.?.?.? thanks
http://www.ssr-wheels.com/wheels/ms1_181920.asp
click on one of the sizesin the lower right corner and the chart will come up
http://www.ssr-wheels.com/wheels/ms1_181920.asp
click on one of the sizesin the lower right corner and the chart will come up
Last edited by silverTRD; 12-24-08 at 06:03 PM. Reason: ..................
#2
Registered User
iTrader: (61)
1. pick what size wheel you want. for instance 18x9
2. The number below offset is the amount of lip, the lower the offset the bigger the lip.
3. Super low disk[sl] is going to be for a big brake clearance, compared to the hyper disk[hp] which will be for the biggest lip.
2. The number below offset is the amount of lip, the lower the offset the bigger the lip.
3. Super low disk[sl] is going to be for a big brake clearance, compared to the hyper disk[hp] which will be for the biggest lip.
#4
All explained here:
http://og-made.com/archives/2164
http://og-made.com/archives/2164
#5
1. pick what size wheel you want. for instance 18x9
2. The number below offset is the amount of lip, the lower the offset the bigger the lip.
3. Super low disk[sl] is going to be for a big brake clearance, compared to the hyper disk[hp] which will be for the biggest lip.
2. The number below offset is the amount of lip, the lower the offset the bigger the lip.
3. Super low disk[sl] is going to be for a big brake clearance, compared to the hyper disk[hp] which will be for the biggest lip.
#6
Wheel backspacing and offset are explained here:
https://www.rsracing.com/tech-wheel.html#backspace
http://www.eastwoodco.com/jump.jsp?i...8&iSubCat=1441
https://www.rsracing.com/tech-wheel.html#backspace
http://www.eastwoodco.com/jump.jsp?i...8&iSubCat=1441
#7
All explained here:
http://og-made.com/archives/2164
this one seems to be trying to find out lip size, not determining b/s and offsets as is indicated by the title of the article. i dont understand how the offset corresponds to the number under it. i understand the sl through hp. i dont know how to convert that to making sure the wheels will fit.
http://og-made.com/archives/2164
this one seems to be trying to find out lip size, not determining b/s and offsets as is indicated by the title of the article. i dont understand how the offset corresponds to the number under it. i understand the sl through hp. i dont know how to convert that to making sure the wheels will fit.
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
09-01-15 10:46 PM