serbRX7

iTrader: (9)

in the meddle of bunch of projects

to reduce wheel hope i got me some super-pro bushings for trailing arms ,toe links and diff

i have seen some aftermarket toe links and trailing arms snap so i am sticking with the stock ones hopefully this bushings help out

any tips on how to get the stock bushings out from the toe links and trailing arms
- i could burn the rubber out but what about outer shells

any insight would be appreciated

Rxmfn7

iTrader: (4)

Do you have access to a press? A press and a good socket set makes quick work of them. For the toe links you will need to get a hacksaw and cut off the edges of the one bushing so you have a place to support it from one side while pressing them out from the other. You could always give the bolt/washer/socket method a try, but even with a press getting those new superpro bushings in was a pain in the ***.

serbRX7

iTrader: (9)

i don't have press....looks like i will have to send them out to get them done

Rxmfn7

iTrader: (4)

If you dont find anywhere local and are willing to pay shipping both ways, Ill do them for you.

serbRX7

iTrader: (9)

didn't look locally yet

but how much would you charge

2 x trailing arms bushings

2 x inner toe link bushings