toe links and trailing arms super-pro bushings
 

in the meddle of bunch of projects

to reduce wheel hope i got me some super-pro bushings for trailing arms ,toe links and diff

i have seen some aftermarket toe links and trailing arms snap so i am sticking with the stock ones hopefully this bushings help out

any tips on how to get the stock bushings out from the toe links and trailing arms
- i could burn the rubber out but what about outer shells

any insight would be appreciated

Do you have access to a press? A press and a good socket set makes quick work of them. For the toe links you will need to get a hacksaw and cut off the edges of the one bushing so you have a place to support it from one side while pressing them out from the other. You could always give the bolt/washer/socket method a try, but even with a press getting those new superpro bushings in was a pain in the ass.

i don't have press....looks like i will have to send them out to get them done

If you dont find anywhere local and are willing to pay shipping both ways, Ill do them for you.

didn't look locally yet

but how much would you charge

2 x trailing arms bushings

2 x inner toe link bushings