Suspension/Wheels/Tires/Brakes

RX2 Fender Rubbing Problem

Old 11-17-15, 10:35 PM
  #1  
Full Member

Thread Starter
 
wkubillus1's Avatar
 
Join Date: Jan 2007
Location: california
Posts: 55
Likes: 0
Received 0 Likes on 0 Posts
RX2 Fender Rubbing Problem

Currently the tires are 205/60/13, the discs and calipers were changed to rx7 (Now has spacer, possibly for bolt pattern?).

Due to limited choices in the 13 inch tires

I was planning on getting new tires 175/60/13 in the front and 185/60/13 in the back. I was thinking that 185 in the front may still be a bit too wide.
Or
I could try to have a tire shop replace the spacer for a thinner spacer?
Or
Get new tires and rims with a difference off set.
Or
Flare out the fenders again?

Any suggestions?














Old 12-15-15, 10:21 PM
  #2  
Junior Member

iTrader: (4)
 
phdofski's Avatar
 
Join Date: Mar 2010
Location: Poconos PA
Posts: 43
Likes: 0
Received 0 Likes on 0 Posts
Did you try it without the spacers or will you rub the inboard side? That way you can also check the bolt pattern.


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:02 AM.