RX2 Fender Rubbing Problem
 

Currently the tires are 205/60/13, the discs and calipers were changed to rx7 (Now has spacer, possibly for bolt pattern?).

Due to limited choices in the 13 inch tires

I was planning on getting new tires 175/60/13 in the front and 185/60/13 in the back. I was thinking that 185 in the front may still be a bit too wide.
Or
I could try to have a tire shop replace the spacer for a thinner spacer?
Or
Get new tires and rims with a difference off set.
Or
Flare out the fenders again?

Any suggestions?


https://cimg8.ibsrv.net/gimg/www.rx7...61bccf0474.jpg


https://cimg7.ibsrv.net/gimg/www.rx7...d63befd948.jpg


https://cimg5.ibsrv.net/gimg/www.rx7...2857a42c6d.jpg


https://cimg2.ibsrv.net/gimg/www.rx7...b64d962dad.jpg


https://cimg0.ibsrv.net/gimg/www.rx7...7c4892f606.jpg

Did you try it without the spacers or will you rub the inboard side? That way you can also check the bolt pattern.