Looking for the FD rear wheel bearing specs. Outer diameter, inner diameter and width in millimeters. Thanks.

O.D. = mm
I.D. = mm
W. = mm

 

Assume you're trying to buy non Mazda sourced bearings?

If so, SKF, ***, etc, used to list in their catalogues wheel bearings by make and model, which should provide a # you can cross reference easily enough, for a common double row. I'd expect NSK or NTN to be the oem supplier.

 

I maybe able to help with OD and ID when I get down to my shop. I think I might still have most of the one that was destroyed while replacing wheel studs. But it's a split race and not sure I still have both halves to give you width.

 

For some reason the FD is not listed with *** bearings but the FC and FE both are...

 

Thanks.

 

Funny the auto-censors! According to a european cross ref, the bearings are AU0925-1LL/L588 NTNs 83x45x45

 

My measurements confirm Billy boy's

OD= 83mm
ID= 45mm
H = 45mm

 

Thanks guys, I appreciate the help.