Question for the Wheel expert guys--Manny, Rishie, etc
#1
Original Gangster/Rotary!
Thread Starter
iTrader: (213)
Question for the Wheel expert guys--Manny, Rishie, etc
Can I run SSR GT1's 17x9 all around, and will Yoko AVS Intermediates 255/40zr17 fit on all 4 corners?
I have a Tanabe coilover setup.
Rishie, what kind of pricing can you get my on the package, and also on just the rims? Please get back to me as soon as possible.
Thanks guys
I have a Tanabe coilover setup.
Rishie, what kind of pricing can you get my on the package, and also on just the rims? Please get back to me as soon as possible.
Thanks guys
#4
Rich,
I think SleepR1 runs that setup with +45 mm offset SSR Integral A2s. As long as the offset it right, you should be able to get away with it.
Fun fact: I met both you (Rich/GoodfellaFD3S) and Manny (SleepR1) at MADS back in April '99.
-Max
I think SleepR1 runs that setup with +45 mm offset SSR Integral A2s. As long as the offset it right, you should be able to get away with it.
Fun fact: I met both you (Rich/GoodfellaFD3S) and Manny (SleepR1) at MADS back in April '99.
-Max
#6
Lives on the Forum
Rich that's right I have 9 x 17, 45-mm offset SSR Integral A2s with 255/40-17 Yokohama AVS Intermediates all the way around with no rubbing problems at all road or track. Springs are H&R, shocks are stock Showa R1. Sway bars are Eibach.
#7
Original Gangster/Rotary!
Thread Starter
iTrader: (213)
Originally posted by maxcooper
Fun fact: I met both you (Rich/GoodfellaFD3S) and Manny (SleepR1) at MADS back in April '99.
-Max
Fun fact: I met both you (Rich/GoodfellaFD3S) and Manny (SleepR1) at MADS back in April '99.
-Max
That was back in the day of the "old" tristate club; Ed Kim, Wael El Dasher, Ryan Schlagheck, Tony 'The Greek' D, and Gordon Monsen, among others. I know Ryan sold his car, and Wael posted awhile back. Ed and Gordo are both on the forum and still have the rotary addiction
Trending Topics
#8
Originally posted by SleepR1
OK, this is driving me nuts...what was the situation?
Did I talk much? Where did we meet? Were we at the Texas Road House? Were we in Blue group together?
OK, this is driving me nuts...what was the situation?
Did I talk much? Where did we meet? Were we at the Texas Road House? Were we in Blue group together?
We didn't get into a long conversation or anything. I think Pauly was changing the brakes on someone's car in the parking lot at the hotel and we met then. I don't think we even exchanged names, but I figured it out later.
-Max
#11
Lives on the Forum
Max,
Yeah, Paul was changing my brakes on my red Rx7 (I think?). Too bad I don't recall...I have to be sure to exchange names with people!
Tim,
I do remember meeting you at Road Atlanta in 2000 (although, I don't think we exchanged names then either) FWIW, I've taken my car off of the market, and I plan to re-motor and re-turbo the FD when the time comes. Based on Ramon Ceron's review, and others' as well, I'm going with KD Rotary for all the work... I guess this means the brakes will stay where they are Perhaps when I'm all set with new motor and turbos, I'll make another appearance at Road Atlanta
Yeah, Paul was changing my brakes on my red Rx7 (I think?). Too bad I don't recall...I have to be sure to exchange names with people!
Tim,
I do remember meeting you at Road Atlanta in 2000 (although, I don't think we exchanged names then either) FWIW, I've taken my car off of the market, and I plan to re-motor and re-turbo the FD when the time comes. Based on Ramon Ceron's review, and others' as well, I'm going with KD Rotary for all the work... I guess this means the brakes will stay where they are Perhaps when I'm all set with new motor and turbos, I'll make another appearance at Road Atlanta
Thread
Thread Starter
Forum
Replies
Last Post
diabolical1
2nd Generation Specific (1986-1992)
30
01-30-16 05:50 AM