Post Pics of your FD Wheel Fitment!!
01-19-12, 09:50 AM
#803
I love those front fenders imo they keep the stock lines of the FD but make it look more aggressive...I'm also digging your rear fender pull also goes well with the look...it reminds me of the c6z06 as far as purposely built wide body aggressiveness...whenever I finish performance upgrades and start concentrating on looks on my FD, I'm thinking about doing something on the lines of this. Also are those fenders actually available for sale on shine's website?
01-19-12, 02:43 PM
#804
Make an assessment...
iTrader: (3)
Thanks!
I'm not sure if they're on his website, these were the very first set he sent out so I never looked on there. You can PM him here and he'll probably make you some, or he might have a set already made, but he goes missing for a while most times so you might not hear back from him in a timely manner lol.
I'm not sure if they're on his website, these were the very first set he sent out so I never looked on there. You can PM him here and he'll probably make you some, or he might have a set already made, but he goes missing for a while most times so you might not hear back from him in a timely manner lol.
02-06-12, 09:10 PM
#806
Any of you with aggressive wheel setups run in to rubbing issues in front. More towards the head light bucket area? I'm running an 18x10.5+13 with a 265/35 and at full lock it barely rubs. Any input would be greatly appreciated. Just had the car aligned and everything was in spec.
02-07-12, 08:38 PM
#811
Make an assessment...
iTrader: (3)
I sold them and got a less aggressive setup LOL. Well, when I say less aggressive I mean going with a 9.5 instead of 10, but my offsets went from +38 to +22. It might help going with a more aggressive offset, but I can't confirm that. Maybe if you did a 255/35 it would help. Not sure.
02-12-12, 03:51 AM
#813
Im running 18x9.5 and 18x10 with 225/40/18's and 265/40/18s. Also does anyone know if 18x10 +15 with 265/40's will fit the batty? looking at some rota grids but cant find any info on fitment
02-15-12, 06:14 AM
#815
Can Post Only in New Member Section
Join Date: Feb 2012
Location: usa
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
02-16-12, 12:05 AM
#817
Make an assessment...
iTrader: (3)
Thanks man! I have current pics of it in the picture thread. The front fenders are the same as the rear now, if you haven't seen it already.
Funny you mention the Vette. Originally I was going to get the rears redone to be more bubbled like the Shine fenders, but after looking more at Z06s and seeing mine photoshopped with the lips on the front, I knew I had to have lips on the front too lol.
Are you just wanting to do the rear fenders? We did it with an Eastwood fender roller. It just took several hours and lots of patience lol. Are you going to DGRR? I'll be there.
Funny you mention the Vette. Originally I was going to get the rears redone to be more bubbled like the Shine fenders, but after looking more at Z06s and seeing mine photoshopped with the lips on the front, I knew I had to have lips on the front too lol.
Are you just wanting to do the rear fenders? We did it with an Eastwood fender roller. It just took several hours and lots of patience lol. Are you going to DGRR? I'll be there.
02-16-12, 08:54 AM
#818
Any of you with aggressive wheel setups run in to rubbing issues in front. More towards the head light bucket area? I'm running an 18x10.5+13 with a 265/35 and at full lock it barely rubs. Any input would be greatly appreciated. Just had the car aligned and everything was in spec.
