0verb00st

My coilovers pop when im driving at a low speed (parking lots) while turning. What causes this and how do I stop it. I heard I have to take an impact wrench and tighten the top nut. It sounds like only the front right coilover is making the noise.

DK

iTrader: (5)

Yeah try tightening first... they may just be loose. Since you have Max coilovers, the pillow ball could also have an abnormal amount of play in it, causing the noise.

0verb00st

How could I check this. Does this have an adverse effect on handling?

0verb00st

I tightened everything down. How much pressure should be on the springs? Shouldnt it be snug but not tight to prevent preloading? I tightened everything down and it is still popping (didnt use the impact wrench...)

theflatlander

iTrader: (3)

your pillowball mounts are binding. you need new ones. If you leave it as it is you'll wear out the piston in the shock as its rotating instead of the pillowball.

RE TurboII

iTrader: (2)

Call Dan at the shop and tell him your situation

teknolust72

Spring binding?? did you set the preload correctly on the springs?

mannyvidal

iTrader: (2)

+1 wrap some wire on the botom of the springs so they dont slip old scca trick with popping springs