i8urchvy

Hey guys I need help bad. Yesterday on the way to school some idiot was following too closely, he clipped my drivers side rear corner which caused me to loose the rear end and I hit the side of the mountain with the passenger side front at about 20mph. I went to get my car aligned today and the guy said he couldn't get the drivers side within spec for the caster, so no it pulls to the right when driving. He said he thinks the frame may be bent, but wasn't sure. Here are the results of the alignment, does anyone have any suggestions, can I get a caster/camber kit to maybe bring it in specs. thanks

Here's the details from my alignment

Left Front
___________________Actual Before Specified Range
Camber_____________-0.69___-0.77___-0.67___0.83 (degrees)
Caster_____________7.11____6.75____5.08____7.08
Toe________________0.04____-0.41___-0.04___0.09
SAI________________14.68___14.68___.....___....
Included Angle_____14.00___13.91___.....___....
Turning Angle Diff._....___....___-6.00___-2.00

Right Front
___________________Actual Before Specified Range
Camber______________0.26____1.29____-0.67___0.83
Caster______________5.55____6.51____5.08____7.08
Toe_________________0.02____-0.43___-0.04___0.09
SAI_________________14.99___13.82___.....___.....
Included Angle______15.25___15.12___.....___.....
Turning Angle Diff._____...._.....__-6.00___-2.00

Front
_________________Actual Before Specified Range
Cross Camber_____-0.95___-2.06___-1.00___1.00
Cross Caster_____1.56____0.24____-1.00___1.00
Cross SAI________-0.31___0.86____.....___.....
Total Toe________0.06____-0.84___-0.08___0.18

Left Rear
_________Actual Before Specified Range
Camber___-1.63___-1.62___-1.97___-0.47
Toe_______0.01___0.22____-0.03____0.11

Right Rear
_________Actual Before Specified Range
Camber___-1.08___-1.05___-1.97___-0.47
Toe______0.06____0.06____-0.03___0.11

Rear
_____________Actual Before Specified Range
Total Toe_____0.07____0.29___-0.05___0.22
Thrust Angle__-0.06___0.16___-0.10___0.10