Pic Request and General Fitment Question
#1
Full Member
Thread Starter
Pic Request and General Fitment Question
Hey all!
Gonna start with my picture requests - looking for a red FD on 18x9.5 +40mm Advan RG-D2's and Advan TC4's (preferably in white) (I know those wheels only come in a +45mm offset, so if anyone is running spacers or anything, just be sure to note that)
As far as my general fitment question, I'm planning to run 18x9.5 +40mm wheels with 265/35 square. I know for a fact that I'll have to roll the front fenders, I've accepted that. What I want to know is whether they will clear the rear lips without rolling. The car is on jack stands right now, on stock suspension. Coils and wheels are on the way for it, so I'd like to get everything rolled that needs rolled now before lowering it and potentially running into clearance issues with the rolling tool.
Thanks!
Gonna start with my picture requests - looking for a red FD on 18x9.5 +40mm Advan RG-D2's and Advan TC4's (preferably in white) (I know those wheels only come in a +45mm offset, so if anyone is running spacers or anything, just be sure to note that)
As far as my general fitment question, I'm planning to run 18x9.5 +40mm wheels with 265/35 square. I know for a fact that I'll have to roll the front fenders, I've accepted that. What I want to know is whether they will clear the rear lips without rolling. The car is on jack stands right now, on stock suspension. Coils and wheels are on the way for it, so I'd like to get everything rolled that needs rolled now before lowering it and potentially running into clearance issues with the rolling tool.
Thanks!
Last edited by ndinunz; 05-19-23 at 02:20 PM.
#3
Full Member
Thread Starter
Yeah, I've been scouring the post yo wheels thread, which is exactly what helped me figure out the specs I want to run. Although, most people that posted their cars don't really mention which fender modifications are necessary. I suppose I can fit the wheels and tires and figure out if I need additional clearance, but it would make my life a lot easier to just know sure-fire from someone who has the exact setup.
#4
not sure scouring would be the right word to use here but if you go in that thread and scroll up to post 113, you'll see your answer. the forum has a private message feature so you contact people outside of threads to ask questions. you would simply ask the maker of post 113 if any fender mods needed to be done. although looking at the picture, you can see his rear fenders appear to be untouched.
theres a lot more that goes into wheel fitment and body mods than just width and offset. ride height and alignment settings play an equally large role
theres a lot more that goes into wheel fitment and body mods than just width and offset. ride height and alignment settings play an equally large role
Thread
Thread Starter
Forum
Replies
Last Post