if you have a FD with a shine FEED style 25mm front + 25mm rear wide fenders, please post as many pics as you can

wheel size including offset
tire brand and size
alignment settings (camber, caster, toe)

i'm trying to see which combo works best so i can plan for my next set up

 

Go through the 'post pictures of your FD' thread in the 3rd gen section...

Ever since shine offered this for a good price on this side of the pacific, lots, and lots have gone with the shine feed body work, lots have posted pictures up...

But most if not all are in the 6500 post count thread...


J.

 

https://www.rx7club.com/build-thread...thread-841240/

 

That 7 is sick looking. Damn that car is fresh!

 

info here: Cars

no offset stated

 

Purerx's old FD was gorgeous... https://www.rx7club.com/3rd-generati...y-93fd-982123/

 

Feed aero looks great in many ways and with many set ups. I have 2 examples that would probably help if you wanted a meaty set up or a stanced set up. The Yellow Fd has 18x10 +/- 0 with 225 40 tires and 18x13 +20 with 295 30 tires. And Herblenny's fd
18x9.5 +18 with 255 35 r888 tires and 18x10.5 +18 with 295 30 r888 tires. Although id probably run an 11 inch wheel with a 295 personally.

 

I would go with an 18x11 +30mm Advan TC3, the one in the pictures you show above with a 295/30/18 tire.

 

I'm planning on running FEED with adman tcIII 18x10 +35 offset bc thats all they offer with a 25mm spacer with 255 35 and 18x11 +15 in rear with 295 30 just like the fujita car.