Here are the alignment specs off of Pettit Racings sight.. For some reason they've deleted this information from the "FAQ" section...

I'm running SO3's with the "Street" settings dialed in.... It really makes a positive handling difference over stock specs.. I'd also recommend you rotate tires at each oil change... it'll extend their life..

Good luck,

Rich

http://www.3rdgenrx7.com/images/pettit_alignment.jpg

 

? i don't see any specs.

are yours the same as these

http://1.3-liter-turbo.com/fun/fd/pettit_alignment.jsp

 

Yeah.... I was trying to get the image to come up on the page... didn't work

 

wow thanks a bunch karken. I have been looking for something like that for a while, me being the suspension noob I needed to know that. Thanks

 

The link doesn't work. I have 18"s on the way and need these specs. Also does anyone know if these specs are for Fd's with stock springs or with lowering springs?

 

yea, its not working for me either. of course the thread is over a year old. try this:

http://westpenn.rx-7.org/Files/FD_Align.html

 

This link is currently working for the Pettit specs:

http://www.jimagu.com/tinou/pettit_alignment.jpg

 

I went ahead and put a copy of this on my site so hopefully it wont disappear again...


http://www.3rdgenrx7.com/images/pettit_alignment.jpg

 

I recently changed my alignment settings to the Pettit long track settings. Before the change, the car wanted to go straighter. The front end was way out of alignment, and the car had way too much understeer. The new alignment makes the car feel much more "tossable" and responsive. I can't comment on tire wear at this point. Given the way I drive the car, I don't think it will be a problem.

 

I went ahead and brought my dad's old alignment thread back from the dead because I recently received a request for an alignment recommendation