Yobai Party

iTrader: (2)

The rear should be no problem with a slight pull...The fronts are going to be a bit more challenge but with 215s, I think you'll be fine.

I'm running 225/40 on a 18x9 +1 and it's VERY close and rubs a little -- yours will be 2mm out from that and I maxed out my camber.

With a little work and the right tire sizes, that setup should look BAD ***. Please post pics when you get it done.

zracin

RETed. I know you posted on your page that a 10 width with +25 offest would work, I also know you said diameter doesnt matter. im just trying to confirm (anyone chime in if you have them) before I buy a set of rims though, that 18x10 in the rear will work with offset of +25. What size tire should I go with?

Josh18_2k

iTrader: (3)

yah that'll fit in back. do 255/35/18

Spectrum24x

im suprised theres 183 pages on this...

anyways im looking at doing 17x8 +35mm front and 17x9 +42mm in the rear..

will this fit?

FC_EDDIE

iTrader: (30)

got myself a DD FC and I wanna run a fatty wheel. I plan on rolling the stock fenders without cutting the wells. Can I roll enough to fit:

17x10 +20 all around on 255/40s?

thanks in advance

MaczPayne

iTrader: (5)

Yo Eddie,

You'll need a spacer to clear the coilover in the front, and a pretty aggressive pull on the front fender, or 30mm overfenders. Rears should fit with a roll and pull and no spacer. I pulled my front fenders for 17x9 +17 and they were a pain to do... that thin sheet metal buckles easily.

K!NCH

iTrader: (2)

Front yes, rear would need a spacer.

FC_EDDIE

iTrader: (30)

Ah indeed. Ok so I will buy the wide fronts then. Thx yo!!!

Gryffinwings

iTrader: (3)

We'll these fit?

http://cgi.ebay.com/ebaymotors/18-XX...Q5fAccessories

or these:

http://cgi.ebay.com/ebaymotors/17-XX...item27b0d048f0

MXRXRicky

iTrader: (3)

Hey what would be the danger in using 1" ebay spacers on my drift car for drifting. To be exact these.

http://cgi.ebay.com/ebaymotors/ws/eB...ht_2238wt_1167

I am Currently running Stock suspension with wheels that have
Number of Bolts: 5
Rim Width: 8
Bolt Pattern(s) (millimeters): 5x114.3
Rim Diameter (inches): 17
Offset: 30

on 17 x 225/45 tires

JordB

OK so I've nearly got mine where i want it. Just needs lowering a touch more front and rear.

F - 17x9 +10 - 215/40
R - 18x11 +16 - 255/35

K!NCH

iTrader: (2)

Looks good. Wheels are they? More pictures!

JordB

Thanks, they are SSR Professors. More shots can be found here - http://www.flickr.com/photos/29088057@N04/

Grip

iTrader: (9)

looks good JordB, but a little to much poke out back.

if you need rear camber adjusters, i have a brand new set of MMR-Direct, and a brand new set of AWR adjusters.

Josh18_2k

iTrader: (3)

what do you want for the mmr camber adjusters

JordB

Cheers man, there should actually be 23mm LESS poke than your setup. Forgive my ignorance as Im used to Nissans - does the camber correction pull the bottom of the wheels in or push the top of the wheels out?

I presume the later therefore I need all that camber to make them fit, I don't really want any more flare.

chatchie

iTrader: (22)

Real quick 17x7.5 with a 42 offset. Will these fit all the way around? I can get a set uber cheap. I don't mind running a small spacer.

BUSTN

Stock fender 90 gtu
18x9 +12 front
18x9.5 +12 rear

Will it work???

K!NCH

iTrader: (2)

So I'm running 17x8 +35 all the way around, and I want to make them flush. Wondering how big of a spacer I need. Like 10mm in the front and 15mm in the rear? 10mm all round? 15mm all around?

MaczPayne

iTrader: (5)

15mm all around, and roll/pull your fenders to fit

K!NCH

iTrader: (2)

The fender lips are rolled upwards, I need to throwin some more negative camber anyway. Think that will fit it?

MaczPayne

iTrader: (5)

Should fit nicely

K!NCH

iTrader: (2)

Awesome, I'm looking at a pair of the same wheels but in a 17x9 +35 for the rear for a stagger setup. Think they'll sit flush if I get the spacers?

turbomigo

Forgot if i posted specs ans pics of my new(to me) wheels in here,

Raceon 30mm rear overs "squeezed" slightly so prob 36mm
SSR Agle Courgage
18x9 -19 front
18x10.5 -16 rear

So far its been1.17x9 +15 F/R MB weapons w/25mm spacer on the rear
2.18x9.5 +15 F/R Rota torques w/ 15mm rear spacer
3.18x8.5+26 18x9.5+30 SSR Agle Minerva with 15mm spacer front 25mm spacer rear

MaczPayne

iTrader: (5)

Should work out fine