The Official FC Wheel Fitment Thread
#4301
Brap Brap Brap
Join Date: Nov 2007
Location: Minneapolis, MN
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Ok, Im never happy with a tire/wheel setup.
Im waiting for my wheels to get here. Weld Magnum 2.0 Drags, 15x9 with 25mm of offset. Tires will be 275/50 (26x11.5 ET Streets). Ive sat out side and measured again and again. And now I need a 100% sure fire answer. I know somebody on this bloody forum knows, or is running a bigger tire then this with stock fenders. Im running Hipermax Drag coilovers.
Can I run a 28" tire? Or a 295mm. Or both?
Is it possible to pull out these stock fenders enough to clear a 12.5" wide tire out back?
Can I hammer the **** out of the inner wheel well to clear a 28" tire?
I know it sounds stupid to jump from a 26x11.5 to a 28x12.5.
But the extra sidewall and/or extra width will REALLY help me out.
The M/T website say for the ET Streets:
26x11.5 - 12" sidewall width, 9.8" tread width, and are 26.3 inches tall
28x11.5 - 11.1 " sidewall width, 8.6" tread width, and are 27.6 inches tall
28x12.5 - 12.6" sidewall width, 10" tread width, and are 28.1 inches tall
Id run a 15x9 for the 11.5's, and a 15x10 on the 12.5
Ive been told that the 26x11.5 setup would work on my current wheels Im getting (unless I can fit a bigger tire, then the wheels will go back, and Ill order new ones.)
If its to to the point that I clear my suspension by like nothing, thats fine, I just need the room to clear up and down on the launches, and when the tire stretches at high speeds.
Its such a pain in the *** to figure this out! I dont know anybody with extra wheels and tires this size and with the right offsets to mount on the car.
Building a drag car is a pain in the ***. But Its gonna be hella cool!
Im waiting for my wheels to get here. Weld Magnum 2.0 Drags, 15x9 with 25mm of offset. Tires will be 275/50 (26x11.5 ET Streets). Ive sat out side and measured again and again. And now I need a 100% sure fire answer. I know somebody on this bloody forum knows, or is running a bigger tire then this with stock fenders. Im running Hipermax Drag coilovers.
Can I run a 28" tire? Or a 295mm. Or both?
Is it possible to pull out these stock fenders enough to clear a 12.5" wide tire out back?
Can I hammer the **** out of the inner wheel well to clear a 28" tire?
I know it sounds stupid to jump from a 26x11.5 to a 28x12.5.
But the extra sidewall and/or extra width will REALLY help me out.
The M/T website say for the ET Streets:
26x11.5 - 12" sidewall width, 9.8" tread width, and are 26.3 inches tall
28x11.5 - 11.1 " sidewall width, 8.6" tread width, and are 27.6 inches tall
28x12.5 - 12.6" sidewall width, 10" tread width, and are 28.1 inches tall
Id run a 15x9 for the 11.5's, and a 15x10 on the 12.5
Ive been told that the 26x11.5 setup would work on my current wheels Im getting (unless I can fit a bigger tire, then the wheels will go back, and Ill order new ones.)
If its to to the point that I clear my suspension by like nothing, thats fine, I just need the room to clear up and down on the launches, and when the tire stretches at high speeds.
Its such a pain in the *** to figure this out! I dont know anybody with extra wheels and tires this size and with the right offsets to mount on the car.
Building a drag car is a pain in the ***. But Its gonna be hella cool!
#4302
4th string e-armchair QB
iTrader: (11)
Join Date: May 2005
Location: North Bay, Ontario
Posts: 2,745
Likes: 0
Received 0 Likes
on
0 Posts
Seriously, you will be fine with 26 x 11.5. If you need more traction, go with a 26 x 10.5 ET Drag pure slick.
I don't think I've ever seen anyone around run a 28" tire on the rear end of an FC.
I don't think I've ever seen anyone around run a 28" tire on the rear end of an FC.
#4303
xXxFC3SxXx
iTrader: (8)
I just got my t2 rims just wanted to know what is the biggest size i can run in the rear and the biggest size i can run on the front. I don't want something to massive I just want something that will have some beef to it. I am planning on buying some toyo proxies for everyday driving.
#4306
Brap Brap Brap
Join Date: Nov 2007
Location: Minneapolis, MN
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
#4307
4th string e-armchair QB
iTrader: (11)
Join Date: May 2005
Location: North Bay, Ontario
Posts: 2,745
Likes: 0
Received 0 Likes
on
0 Posts
that's not with an FC rear end though. IRS changes everything, you gain camber when it squats, and you aren't able to adjust where the wheel sits in the well. If you're dead set on doing it, just do it and see if it works, and then let us know.
#4308
Brap Brap Brap
Join Date: Nov 2007
Location: Minneapolis, MN
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Found a 28x11.5 ET street. Just the tire, no wheel. lol. Jack the 7 up and tried a test it. the fenders on this car arent rolled yet. Id need to hammer the week well out a bit. Or just cut bits out to help clear, then weld in new plates, since the cage is in, I cant just have it mini tubbed. Then remove the exhaust heat shields. And find different trailing arms.The tire hit the trailing arm before it hit the coilovers. Any opinions on different trailing arms that wont give me clearance issues?
#4309
Enthusiast
iTrader: (5)
Finally got my 5zigen FN01R-C's!!! I'm looking for some nice fitting wheel locks like RAD German wheel locks. They have a 50mm (1.94 inch) shank. Will that fit?
Here's the link
http://www.amazon.com/German-Wheel-L.../dp/B001EMCVO6
Thanks,
~Ant
Here's the link
http://www.amazon.com/German-Wheel-L.../dp/B001EMCVO6
Thanks,
~Ant
#4310
Brap Brap Brap
Join Date: Nov 2007
Location: Minneapolis, MN
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Might just send the car to my fabricator, and have the wheel tubs cut out, and raised as much as possible, then sell my coilovers, and have them fab up a good custom setup. And have my fender lips ground down a bit so theres no issue with rubbing. He said without a doubt, he could get a 275/60 under there. And a 295/55 if pulled the mount over a few millimeters on the shock towers.
This could turn into a messy project. lol
This could turn into a messy project. lol
#4316
screw u guys im goin home
iTrader: (15)
Join Date: Aug 2005
Location: Findlay, Ohio for now. Thinking about moving in with your mom.
Posts: 1,263
Likes: 0
Received 0 Likes
on
0 Posts
Front: 18x9 +48 offset 1.5in lip
Rear: 18x9.5 +49 offset, 3in lip
Will these fit the fc and what size tires should I use if so?
Rear: 18x9.5 +49 offset, 3in lip
Will these fit the fc and what size tires should I use if so?
#4321
Full Member
iTrader: (2)
Join Date: Feb 2008
Location: Dallas
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
I have read about 50 pages, and my question hasnt been answered, well all of it anyways, would his combo work;
17x8.5 +32, ideally would like to run 235s up front and
18x9.5 +25, ideally would like to run 285 or 275, think this combo would work with out spacers? If not suggestions?
17x8.5 +32, ideally would like to run 235s up front and
18x9.5 +25, ideally would like to run 285 or 275, think this combo would work with out spacers? If not suggestions?
#4323
i've been looking through this thread for days and i'm pretty sure i have my answer, but i just want to be sure. im going to be running 18x8.5 +35 up front and 18x9.5 +38 out back. reted's knowledge has been more than great and im pretty sure this set up will work but if anyone out there has any ideas i'd appreciate your help.
#4324
4th string e-armchair QB
iTrader: (11)
Join Date: May 2005
Location: North Bay, Ontario
Posts: 2,745
Likes: 0
Received 0 Likes
on
0 Posts
The best example of 18's on an fc is deltron on TeamFC3S, I think they were 8" and 9", +25 all around, fit perfectly with stock suspension and fenders. Look it up