RacerXtreme7

iTrader: (2)

Everyone can have their own style, but he asked for advice for running EIGHT inch wide in front and said he only wanted to roll and NOT PULL, and here you are telling him how to run 9" in front and pulling fenders. Just keeping the advice to what the guy is looking for.

~Mike..........

CarzArKoo1

nevermind

88 Superfly

iTrader: (1)

I need help trying to find 4 lug fc wheels.

K!NCH

iTrader: (2)

Get Wanatanbes. Or the Rota knock offs.

BASTARD

iTrader: (4)

I think you are in the wrong thread... this is the offical FC wheel fitment, not the FD

arghx

iTrader: (3)

would 17x9 FN01-RC's +35mm fit at all corners with spacers? I have spacers for another set of 17x7 wheels on there (don't remember what size the spacers). I would run 225/45/17 in the front and 255/40/17 in the rear.

BASTARD

iTrader: (4)

9" wide +35 in the front won't work, you would need about a 1/2" spacer to clear the strut

it will really depend on the strut/coilover used as well as tire size

Rotary13B1

iTrader: (8)

17x8.5+42 17x9.5+42

Will these fit a Vert??

K!NCH

iTrader: (2)

^ You will probably need spacers.

BASTARD

iTrader: (4)

definitely will need spacers

BLUE TII

iTrader: (9)

I have some VOLK GTUs from '91 that I am restoring that are 4 lug and the correct offset/size for an FC or Sylvia.

16x7 +30 and 16x8 +30.

looked like this before


so far I had the centers powdercoated, but have not cleaned the hardware and restored the rim hoops yet.

Same color as my other VOLKS


PM me if interested in purchasing them before I finish the restoration and ask more $$ for them.

88Rx-7turboII

iTrader: (2)

im planning on some enkei rz-5's 17x7.5 and 17x9. what would be a good offset for at least an inch of lip?

S5TII

I've got a set of Mazdaspeed MS01's

17x8 +35
17x9 +34

How flush will they be to the outer edge of a standard bodied FC?

RacerXtreme7

iTrader: (2)

If you have them, why don't you just mount them and see if you like the fitmit or not?

~Mike.........

88 Superfly

iTrader: (1)

Yeah man, will they fit 88 4 lug se? if so how much were you looking to get for them?

90rotorhead

iTrader: (1)

just in case anybody is wonderin i used 20mm spacers and fit 245 40 18 rx8 wheels on my fc...just barely

88Rx-7turboII

iTrader: (2)

With a stock bodied fc would it be safe to run 17x7.5 +25 FR with 205/40/17 and 17x9 +20 RR wirh 225/40/17. Should i be able to clear everything?

K!NCH

iTrader: (2)

You'll clear. Why not run a 17x8 +35 up front? +25 might fit too...

pimpinthe7

ok so just another question. 17x8 in the front +35 would a 225 /45-17 fit up front? the back is 17x9 +35 255/45-17 would that fit as well ? thank you guys

Squeeb

iTrader: (4)

I'll admit I don't know **** about offsets so asking for help/advice. I'm wanting to widen the 15x6.5 Vert BBS rims to 8" in front and 9" in the rear. Anyone willing to offer advice on the offsets for this?

K!NCH

iTrader: (2)

Yeah I know the front will definitely clear. The rear should be fine.

rotorsport72

hey guys i need some help i got some wheels for my 87 turboII 18x8 with 35offset for the front and 18x10 with 40offset rears what size tires do u think i should use i what a little stretch oh and by the way i have coilovers someone offer me 2 255 40 18 of the rear for $100 hankooks with like 60 miles on them allmost new thanks

90FC

If your on stock unrolled fenders, i'd stay within the +25 to +35mm offset range for the front and rear.

89fc3sT2

iTrader: (12)

Ight I need help here, I have 16x7 +20 Offset with 225 55 16s, GF210s so 1.5 dropp all the way around the back has ah lil negative camber so the rears dont rub but my fronts rub on the fenders most the time. Im wondering if I get coilovers with adjs Camber plates can I tuk the fronts in so they dont rub at all? Thanks o yea im not dropping it to the ground with the Coilovers ima try n get it back to the 1.5 look n I dont wanna roll the front fenders.


Trini

DC13B

im on the same size rear, but 205 front. same size wheels and offset. im tucking on Tein coilover with camber plates