Need help with picking the correct size slick
Thread Starter
Full Member
Joined: Mar 2002
Posts: 138
Likes: 0
From: Cincinnati, Ohio
Need help with picking the correct size slick
Here is the whole run down. There is a track event coming up and I want to turn the best time 1/4 mile I can.
Im assuming slicks will be my best bet. Im looking for something very sticky but still dont require a huge burnout to heat them up. I will be mounting them on the stock 16X8 rim (also I should note this is on a third gen with an Eibach pro kit).
Im a little concerned about tire rub do to the car sitting lower than stock.
What would be a good setup for my situation?
Thanks a lot for the help!
Im assuming slicks will be my best bet. Im looking for something very sticky but still dont require a huge burnout to heat them up. I will be mounting them on the stock 16X8 rim (also I should note this is on a third gen with an Eibach pro kit).
Im a little concerned about tire rub do to the car sitting lower than stock.
What would be a good setup for my situation?
Thanks a lot for the help!
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
Aug 18, 2015 05:30 PM