Looking for info. ADR/RS Limited wheels
#1
EX Pres of DFW Drunks
Thread Starter
Looking for info. ADR/RS Limited wheels
Ok, I've searched my usualy places for wheel info, but have turned up very little.. What I'm looking for is to see weights, bolt patterns, sizes and offsets for
RS LImited Concept Pro, and
RS Limited Trama
Ideally 4x114.3 40 16x7.
Anybody have some help here? Wheelspecs.com didn't list, manufacturs website had pictures and little more, and I've found a few places that list them for sale, but no info! Argh....
RS LImited Concept Pro, and
RS Limited Trama
Ideally 4x114.3 40 16x7.
Anybody have some help here? Wheelspecs.com didn't list, manufacturs website had pictures and little more, and I've found a few places that list them for sale, but no info! Argh....
#5
EX Pres of DFW Drunks
Thread Starter
I checked on the manufacturs site, and they don't list distributors. So I asked them the same questions, and no one has replied from them either....
#6
Rotary Freak
iTrader: (22)
We are a distributor Eric. They are 20 minutes away from us. Golden Apple. To be honest, I would track Rotas over the ADR's any day. The ADR's seem to be show wheels more than anything. I don't know of anyone running them at the track. Rotas on the other hand are track proven.
I'm sorry I've been real busy. It's a new wheel so I need to call and check fitment. Did you find out if they make your botpattern and 16".
Rishie
I'm organizing all my **** on Saturday. I'm a week behind on my paperwork.
I'm sorry I've been real busy. It's a new wheel so I need to call and check fitment. Did you find out if they make your botpattern and 16".
Rishie
I'm organizing all my **** on Saturday. I'm a week behind on my paperwork.
#7
EX Pres of DFW Drunks
Thread Starter
ok, well I talked with the manufacturer and they make the Trama in 16x7 40mm with the 4x4.5
The concept pro comes in a 16x7 4x4.5 , but it has a 43mm offset. How much difference would that 3mm effect things? (1st person to say 3mm gets flamed)
Anyone know of fitment issues on a GSL-SE with that sizing. I do have GC coil-overs up front, but the clearance did not noticable increase or decrease from stock with that setup. TIA!
Rishie, could you check on pricing on these? My preferences so far:
1) RS limited concept pro (gunmetal, 16.5lbs)
- I like the polished lip a lot...
2) Rota C8 (gunmetal, 15.5lbs)
3) RS Limited Trama (anthracite, ??lbs)
The concept pro comes in a 16x7 4x4.5 , but it has a 43mm offset. How much difference would that 3mm effect things? (1st person to say 3mm gets flamed)
Anyone know of fitment issues on a GSL-SE with that sizing. I do have GC coil-overs up front, but the clearance did not noticable increase or decrease from stock with that setup. TIA!
Rishie, could you check on pricing on these? My preferences so far:
1) RS limited concept pro (gunmetal, 16.5lbs)
- I like the polished lip a lot...
2) Rota C8 (gunmetal, 15.5lbs)
3) RS Limited Trama (anthracite, ??lbs)
Thread
Thread Starter
Forum
Replies
Last Post