Line lock for a 1st gen
01-09-04, 08:32 PM
#1
Line lock for a 1st gen
Has anyone installed a line lock kit on a 1st gen? I've read that
This would be used as theft provention acutally.....If i had my parking brake set really tight, along with the front wheels locked, the car would be very hard to tow away as all 4 wheels are locked. ALong with fuel cut, ignition cut, and alarm......
you either need two line locks, or you need to plug one of the front brake outlets on the master cylinder, run the other line to the line lock, then run a T from the line lock to send the fluid to both brakes.
This would be used as theft provention acutally.....If i had my parking brake set really tight, along with the front wheels locked, the car would be very hard to tow away as all 4 wheels are locked. ALong with fuel cut, ignition cut, and alarm......
Thread
Thread Starter
Forum
Replies
Last Post
Boriquaguerrero
2nd Generation Specific (1986-1992)
20
04-22-19 01:15 PM
diabolical1
2nd Generation Specific (1986-1992)
30
01-30-16 05:50 AM
craaaazzy
Comments and Suggestions Archive
3
08-21-15 02:00 PM