Koni Yellows on lowest 'perch' with 18's, any problems?
Koni Yellows on lowest 'perch' with 18's, any problems?
Been searching and haven't got much. Is there anyone running Koni Yellows with Eibach Prokits on the lowest spring perches with any problems? Rubbing/bottoming out etc?
From my searches most people said: middle front, lowest rear. But I wanted to see if I can place them both on lowest on 18" wheels? Advisable? Doable?
I've yet to install it but I'd like to get it right on the very first try. This will mainly be a sunny day/weekend car with the very occasional auto-x/track.
To paint a better picture, I'll be running:
BBS RG-R (Diamond black
)
18x8.5 ET22 Front
225/40/18F
18x10 ET28 Rear
255/35/18R
Thoughts?
From my searches most people said: middle front, lowest rear. But I wanted to see if I can place them both on lowest on 18" wheels? Advisable? Doable?
I've yet to install it but I'd like to get it right on the very first try. This will mainly be a sunny day/weekend car with the very occasional auto-x/track.
To paint a better picture, I'll be running:
BBS RG-R (Diamond black
)18x8.5 ET22 Front
225/40/18F
18x10 ET28 Rear
255/35/18R
Thoughts?
Last edited by airEpic; Jan 8, 2014 at 10:22 PM.
Top or Middle perch. Eibachs lower quite a bit up front. You may even want them at the top. Might want to search for old posts.
However, with that offset, you'll probably rub regardless.
Lowest is too low for NYC roads. BTDT...
However, with that offset, you'll probably rub regardless.
Lowest is too low for NYC roads. BTDT...
Thread
Thread Starter
Forum
Replies
Last Post
ricardo.benin
Suspension/Wheels/Tires/Brakes
2
Sep 22, 2015 12:06 PM
rotor_veux
2nd Generation Specific (1986-1992)
7
Sep 19, 2015 07:13 PM
