Enkei Nt03 M picture request and fitment question? 17x9.5+44mm?
#1
Full Member
Thread Starter
Join Date: Sep 2005
Location: Indianapolis, IN
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Enkei Nt03 M picture request and fitment question? 17x9.5+44mm?
Is anyone running these wheels on an fd? I am interested in the 17x9.5 which carry a +44mm offset all around. Will they work? What tire size could I run? I'd like to run 255/40's up front and either 255/40 rear or 275/40 rear. Currently the car is stock suspension, but coilovers are in the plans soon. Thoughts?
http://www.edgeracing.com/images/whe...angle_zoom.jpg
http://www.edgeracing.com/images/whe...angle_zoom.jpg
#4
NASA TTS Build
iTrader: (2)
Join Date: Nov 2006
Location: New York
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
There's rubbing at full lock, only on the drivers side though, I also rolled the fronts. I have coilovers and the cars dropped to 25 inches all around. The camber in the front is -1.5 and rear -1.2. Let me look for some older pics, I think they're on the forum somewhere.
Edit: Here's a still shot-
Edit: Here's a still shot-
#5
Full Member
Thread Starter
Join Date: Sep 2005
Location: Indianapolis, IN
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Very nice. Do you think that I will have any spring interference on the stock suspension? Do you think a 275 would work on the rear if I took that route?
#6
NASA TTS Build
iTrader: (2)
Join Date: Nov 2006
Location: New York
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, there was no problem when I was on stock suspension so it should be fine. 275s would fit, I chose to be able to rotate the tires instead. I would roll the rears just in case but they definitely would work.
Trending Topics
#9
needs more track time
iTrader: (16)
There's rubbing at full lock, only on the drivers side though, I also rolled the fronts. I have coilovers and the cars dropped to 25 inches all around. The camber in the front is -1.5 and rear -1.2. Let me look for some older pics, I think they're on the forum somewhere.
What does it rub on? The plastic fender liners or on the fender lips? Did you NEED to roll the fenders or did you do it pre-emptively? Do you know if it would fit with regular springs vs the smaller diamter springs used in coilovers?
They look like some good track wheels but I am concerned about fitting 9.5" wide wheels.
Thanks.
#10
NASA TTS Build
iTrader: (2)
Join Date: Nov 2006
Location: New York
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
What does it rub on? The plastic fender liners or on the fender lips? Did you NEED to roll the fenders or did you do it pre-emptively? Do you know if it would fit with regular springs vs the smaller diamter springs used in coilovers?
They look like some good track wheels but I am concerned about fitting 9.5" wide wheels.
Thanks.
They look like some good track wheels but I am concerned about fitting 9.5" wide wheels.
Thanks.
#11
Rotary Freak
iTrader: (22)
FYI,
I gots the deals on the Racing Series Wheels.
I had these on my RX8 until a month ago. Great wheel, not bad in terms of weight but very sturdy..... Approx 19lbs each.
MASSIVE BIG BRAKE CLEARANCE THOUGH.....
WE'RE DOING 2008 PREORDER DEALS ON ENKEI RACING SERIES WHEELS. ALL WHEELS SHIP OUT AFTER THE FIRST OF THE YEAR OR WHEN AVAILABLE IN STOCK....
Rishie
I gots the deals on the Racing Series Wheels.
I had these on my RX8 until a month ago. Great wheel, not bad in terms of weight but very sturdy..... Approx 19lbs each.
MASSIVE BIG BRAKE CLEARANCE THOUGH.....
WE'RE DOING 2008 PREORDER DEALS ON ENKEI RACING SERIES WHEELS. ALL WHEELS SHIP OUT AFTER THE FIRST OF THE YEAR OR WHEN AVAILABLE IN STOCK....
Rishie
Thread
Thread Starter
Forum
Replies
Last Post