Anyone running zeal b2's on a FD?
#1
sexy no jutsu
Thread Starter
Join Date: Jun 2002
Location: planet arium
Posts: 1,578
Likes: 0
Received 0 Likes
on
0 Posts
Anyone running zeal b2's on a FD?
im about to install these on my car and just want a heads up to see what your dampening and rebound settings are at.
#4
Senior Member
Join Date: Mar 2001
Location: Waldorf, MD
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
I've got the B2's as well. I had 4 up front and 3 in the rear until I went to the drag strip sunday. Dropped it to 1 in the rear and I think it helped with the launch a lot. So unless you're taking serious corners, you might want it softer in the rear.
Do you hear any air escaping like a puff of air noise when you go over some bumps from the rear section? A friend of mine has the B6's and he hears it too. Almost like what a blown shock would sound like but they're practically brand new! I can only hear it from the back ones, too much engine noise to hear the fronts.
Do you hear any air escaping like a puff of air noise when you go over some bumps from the rear section? A friend of mine has the B6's and he hears it too. Almost like what a blown shock would sound like but they're practically brand new! I can only hear it from the back ones, too much engine noise to hear the fronts.
#6
sexy no jutsu
Thread Starter
Join Date: Jun 2002
Location: planet arium
Posts: 1,578
Likes: 0
Received 0 Likes
on
0 Posts
i feel you guys, i get the noise as well. but the shocks seem to still be doing their job.
as of right now i have the fronts set to 3 and the rears to 2.
as of right now i have the fronts set to 3 and the rears to 2.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM