Recently, I had to pull out the tie rod end to change out the boot.
I marked the nut and at the thread before I removed it,
and after the boot is installed, I tried my best to re-align them at the mark.
Is it enough, or do I need a new alignment?

Thank you.

 

With suspension geometry like that on the FD, I would have it checked at my earliest convenience. On a car like a Cavalier it's probably less of an issue, but this car needs to be properly aligned. Sometime in the next 500 miles is probably fine as long as you did a good job marking it.

 

Thanks for the reply.