Alignment Help
#1
Full Member
Thread Starter
Join Date: Aug 2006
Location: Ft. Riley, Kansas
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Alignment Help
I am looking for some alignment specs here to set my car. I have a 93 FD with stock suspension and 225/50/16 Falken Azenis RT-615 tires on stock wheels. I autocross the car at least once a month and open track days every now and then. I am looking for a fairly agressive setup here. I don't mind if it eats tires too badly and follows the cracks in the road. My only thing that I am worried about is rear traction. This is mainly a street car and I drag it often. So I don't want a whole lot of rear camber. I know this is asking for the best of everything, but I am just looking for some input here. Please let me know what your setups are. Thanks for the help.
#2
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
My advice:
front:
1.5 to 1.8 deg camber
6 to 7 caster
0 toe
rear:
1.3-1.5 deg camber
0 to 1/8" toe-in
I would not go less camber than that in the rear or the car will be a little biased towards oversteer.
front:
1.5 to 1.8 deg camber
6 to 7 caster
0 toe
rear:
1.3-1.5 deg camber
0 to 1/8" toe-in
I would not go less camber than that in the rear or the car will be a little biased towards oversteer.
Thread
Thread Starter
Forum
Replies
Last Post
Spirit Rx-7
Suspension/Wheels/Tires/Brakes
6
03-14-16 12:36 PM
erevos
2nd Generation Specific (1986-1992)
4
09-15-15 09:19 AM