Alignment advice?
#1
EX Pres of DFW Drunks
Thread Starter
Alignment advice?
What alignment specs shoudl I shoot for on an autcross spec 1st gen with camber caster plates?
I'm open to suggestions... TIA
I'm open to suggestions... TIA
#2
Junior Member
Join Date: Mar 2002
Location: Olympia WA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Hey Tia,
I am running -2 degrees camber, 3 degrees caster, and 1/8" toe out. If you can a little more toe out that is good. It gives you a bit more ackerman and camber gain in a bump. Now, if you have full-size spring (as opposed to 2 2/1" coil-overs) you can only get about -1 1/2 (maybe a touch more) negitive camber.
Good luck ~ JEB
I am running -2 degrees camber, 3 degrees caster, and 1/8" toe out. If you can a little more toe out that is good. It gives you a bit more ackerman and camber gain in a bump. Now, if you have full-size spring (as opposed to 2 2/1" coil-overs) you can only get about -1 1/2 (maybe a touch more) negitive camber.
Good luck ~ JEB
Thread
Thread Starter
Forum
Replies
Last Post
erevos
2nd Generation Specific (1986-1992)
4
09-15-15 09:19 AM