Tem120

iTrader: (5)

I have an extra pair of rear ABS wheel sensors could they be used on the front as front abs wheel sensors ?

Kind of simple yet complicated .. idont know how they work , if the front sensors are more complex or if its the same diff except with diff length of harness ..


so if anyone could give me a hand with this I'd owe them big time!

Tem120

iTrader: (5)

Also I know the mounting is different but does the sensor itself work ?

billyboy

Pick-ups are quite different lengths from memory - and usually clearances are fairly critical for most of these magnetic sensors to function correctly....probably around 1~2mm required.

Tem120

iTrader: (5)

but they could work?

billyboy

Don't know.

Resistance values at the front are around 1k, rears 1.6~1.7 - again from memory, for versions I - V at least....whether that's particularly critical???

For the effort involved with remaking mounts, maybe for no result, would have thought getting some second-hand units, for a few bucks, might be a better use of time. Bought several sets myself for very little, cause you certainly don't want to buy them new!

Tem120

iTrader: (5)

well if I could find them cheaply I'd be more then willing but this is a good second option .. since I have a very long list of things to buy .

billyboy

Re-orienting the mount from horizontal to vertical.....if it will fit, hell of a job!

rear in front upright




normal front

Tem120

iTrader: (5)

is this showing that it can be done? or that it cannot?