1st gen wheels
#5
Full Member
Thread Starter
Join Date: Oct 2003
Location: Seattle, Washington
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
i am really lookin for a stock wheels that i can get cheap at a junkyard or something. I was looking for an anwser more along the line of (ex. a 86 to 91 honda civic had the same bolt pattern)
#7
Is wanting another -7
Join Date: Nov 2002
Location: Brisbane, Australia
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
As a 1st gen owner, I can confirm what adam c said. There are no other manufacturers that made alloy wheels in 4x110 and in the correct offset for a 1st gen. The early steel wheels from the 1st RX-7s, and RX-2 to RX-5 (though not RX-5/Cosmo AP) are the same PCD and offset, though they are only 5" wide. Even the stock "+" alloys are 5.5"
If you've got a GSL-SE (or have converted to GSL-SE hubs) then the stud pattern and offset is 4x114.3mm (4x4.5") and the offset is +38/40, I think. Lots of things fit the GSL-SE pattern, try Nissan Silvias, 200/240SX or whatever you guys call them. YMMV.
If you've got a GSL-SE (or have converted to GSL-SE hubs) then the stud pattern and offset is 4x114.3mm (4x4.5") and the offset is +38/40, I think. Lots of things fit the GSL-SE pattern, try Nissan Silvias, 200/240SX or whatever you guys call them. YMMV.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Boriquaguerrero
2nd Generation Specific (1986-1992)
20
04-22-19 01:15 PM
craaaazzy
Comments and Suggestions Archive
3
08-21-15 02:00 PM