[Autox] A032R-S pressure/camber (FC)
#1
[Autox] A032R-S pressure/camber (FC)
Got a set of these things for fairly cheap. I have no experiance with R compound tires, and I'd like to maximize my setup without too much wasted time in events.
So experianced people, plz throw in your advice!
Setup-
255/40/17 A032R Soft on 17x9 Wheels all around
Tein Flex with 6kg Front & 5kg Rear
ST sways (front bar has two settings, currently on soft)
camber is totally adjustable
305whp, 2900lbs with driver
I currently run 1 degree camber in back, somewhere around 2.5 in front, and zero toe all around. Whats a good starting point for pressure, and will these tires need less camber? i dont have a pyrometer, or any real suspension tuning experiance.
Also, do these need to be heat cycled at first? I've heard they don't have a whole lot of cycles in them before they get hard, so I dunno if cycling them before i reace will extend their life or just take some miles off. They will only be drivin to and from autox's (about 15 miles)
So experianced people, plz throw in your advice!
Setup-
255/40/17 A032R Soft on 17x9 Wheels all around
Tein Flex with 6kg Front & 5kg Rear
ST sways (front bar has two settings, currently on soft)
camber is totally adjustable
305whp, 2900lbs with driver
I currently run 1 degree camber in back, somewhere around 2.5 in front, and zero toe all around. Whats a good starting point for pressure, and will these tires need less camber? i dont have a pyrometer, or any real suspension tuning experiance.
Also, do these need to be heat cycled at first? I've heard they don't have a whole lot of cycles in them before they get hard, so I dunno if cycling them before i reace will extend their life or just take some miles off. They will only be drivin to and from autox's (about 15 miles)
Thread
Thread Starter
Forum
Replies
Last Post
msilvia
3rd Generation Specific (1993-2002)
15
09-11-15 12:13 PM