Super AFC SAFC2 incorrect hookup. Question.
08-29-06, 06:26 PM
#1
Becoming pure track...
Thread Starter
iTrader: (1)
Join Date: Feb 2005
Location: Olympia, WA
Posts: 1,069
Likes: 0
Received 0 Likes
on
0 Posts
SAFC2 incorrect hookup. Question.
Ok. When I originally hooked up my SAFC2, i accidently hooked up my Ground wires from the SAFC2 to my O2 sensor.
I corrected the problem and reground the actual ground. And hooked up my A/F guage correctly.
When the SAFC2 was attatched to the O2 sensor, I also re-ground that wire to the body. How would this effect gas mileage?
Thanks.
I corrected the problem and reground the actual ground. And hooked up my A/F guage correctly.
When the SAFC2 was attatched to the O2 sensor, I also re-ground that wire to the body. How would this effect gas mileage?
Thanks.
08-29-06, 07:07 PM
#2
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
I'd guess the 02 still works and there is a way to find out. Put a meter on pin 2d if a series four and run the engine. The voltage should be between .04vdc to 1.0vdc.
08-30-06, 03:21 AM
#3
Becoming pure track...
Thread Starter
iTrader: (1)
Join Date: Feb 2005
Location: Olympia, WA
Posts: 1,069
Likes: 0
Received 0 Likes
on
0 Posts
It works. My A/F guage is working. Still trying to tune it down a little though.
Trying to make sure the A/F is working properly too.
1 bar away from the green area. So, who knows. I am at -9% across all RPM.
I wish I had a wideband and a dyno...... maybe on my next paycheck.....
Trying to make sure the A/F is working properly too.
1 bar away from the green area. So, who knows. I am at -9% across all RPM.
I wish I had a wideband and a dyno...... maybe on my next paycheck.....
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
supergoat
Interior / Exterior / Audio
1
07-30-01 09:54 PM
