Single Turbo RX-7's Questions about all aspects of single turbo setups.

whos running a single with stock (non ported) motor?

Thread Tools
 
Search this Thread
 
Old Jul 7, 2003 | 02:16 AM
  #1  
Cetchup's Avatar
Thread Starter
The Cursed FD
Tenured Member 05 Years
 
Joined: Nov 2001
Posts: 914
Likes: 0
From: CA
whos running a single with stock (non ported) motor?

I just got a mazda reman done. (warranty took care of it) I am thinking about going single in maybe 6 months or so, but I would like to know whether it is safe to do so on a non ported motor? Anyone out there running this?
Thanks.
Reply
Old Jul 7, 2003 | 08:54 AM
  #2  
Suds7's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Aug 2002
Posts: 513
Likes: 0
From: San Jose, California
I have a to4s on a stock s5 t2 block.
Reply
Old Jul 7, 2003 | 11:25 AM
  #3  
lane_change's Avatar
It has begun
Tenured Member 20 Years
iTrader: (20)
 
Joined: Feb 2002
Posts: 3,393
Likes: 17
From: Houston, TX
My friends had a T78 on his stock FD motor wth 68,xxx miles on it and it lasted all of 10 days until it blew the rear rotor. Now, wether the two are related, I couldn't tell you....it could be, or it could have been just timing. Who knows?
Reply
Old Jul 7, 2003 | 01:39 PM
  #4  
Suds7's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Aug 2002
Posts: 513
Likes: 0
From: San Jose, California
I don't think a turbocharger can cause the demise of an engine, its usually the engines' owner/operator.
Reply
Old Jul 7, 2003 | 02:08 PM
  #5  
rx7racer11's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 101
Likes: 0
From: Medford Oregon
I think a stock ported motor will do fine with a single.. porting just opens up more air for more top end power.. it doesnt really make it more reliable for more boost or anything. Just make sure you break your engine in properly and make sure your air/fuel mixture is right at the boost your going to run.. and im sure you will be fine..
Reply
Old Jul 7, 2003 | 04:30 PM
  #6  
CCarlisi's Avatar
Rebreaking things
Tenured Member 10 Years
 
Joined: Jun 2001
Posts: 2,586
Likes: 0
From: 1 foot in Boston 1 in NJ
zoomzoom did ever so briefly
Reply
Old Jul 7, 2003 | 05:12 PM
  #7  
apexkw's Avatar
in slow, out fast!
Tenured Member: 20 Years
 
Joined: Apr 2002
Posts: 1,388
Likes: 0
From: Florida
i am running my single on the stock engine. i had mine rebuilt before i put the new turbo on. so hopefully everything goes alright. as long as tuning is there i dont think you will have a problem. i think you should have all the mods to go along with the new engine and turbo...ie radiator, ecu and so on and so forth...dont half *** anything and it should work.
Reply
Old Jul 8, 2003 | 07:49 AM
  #8  
Toy's Avatar
Toy
Senior Member
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 265
Likes: 0
From: MA
i'm still on my stock original engine with 48k miles now.
Reply
Old Jul 8, 2003 | 07:20 PM
  #9  
allrotor93's Avatar
Lives on the Forum
Tenured Member 15 Years
iTrader: (126)
 
Joined: Jul 2001
Posts: 6,703
Likes: 3
From: Cary, NC
just be easy on the boost. most ported motors use the stock 2mm seals anyways.
Reply
Old Jul 8, 2003 | 07:35 PM
  #10  
Marshall's Avatar
Rotary Enthusiast
Tenured Member 15 Years
 
Joined: Mar 2001
Posts: 1,023
Likes: 0
From: Edwards, CA
I do, peak power is at 7200 rpm.
Reply
Old Jul 9, 2003 | 06:03 AM
  #11  
ErnieT's Avatar
Living life 9 seconds at a time
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
I ran a stock reman with a single turbo for over a year with no problems what so ever. (sold the car since, and still no problems) I even ran 10's with it. Very reliable, you just won't make power over 7800 or so.
Reply
Old Jul 10, 2003 | 12:17 AM
  #12  
yogi's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 53
Likes: 0
From: Australia
Yeah I ran my standard S4 turbo motor with a T66 @ 16PSI making 400RWHP on pump gas and an enrichment system for over 2 years and it went fine even after several sessions out on the circuit. Though when it did die there wasn't much left that didn't need replacing I couldn't believe how much better it when after the rebuild and a port job ........... that extra air sure helps !!!!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
sherff
Adaptronic Engine Mgmt - AUS
9
Feb 24, 2019 12:09 PM
BNR34RB26DETT
Build Threads
42
Feb 28, 2018 11:27 AM




All times are GMT -5. The time now is 02:24 PM.