What size turbo?
#1
What size turbo?
Im sorry I have been looking around but just keep getting confused
I plan on doing a blow through system on my 12a streetport.
I will be using a 45DCOE Weber with the set up and most likely just go with the rotary-works turbo manifold instead of going threw the trouble of making my own.
If I use their turbo manifold it is set up with a T4 flange. I dont know the difference between turbos as I have normally been a N/A type of guy. So if someone has a good recommendation it would be greatly appreciated.
Also if I missed a super obvious thread that answers my question feel free to link and flame me I tend to try and figure **** out when its way to late lol.
I only plan on running around 5lbs of boost so nothing crazy.
Thanks again!
I plan on doing a blow through system on my 12a streetport.
I will be using a 45DCOE Weber with the set up and most likely just go with the rotary-works turbo manifold instead of going threw the trouble of making my own.
If I use their turbo manifold it is set up with a T4 flange. I dont know the difference between turbos as I have normally been a N/A type of guy. So if someone has a good recommendation it would be greatly appreciated.
Also if I missed a super obvious thread that answers my question feel free to link and flame me I tend to try and figure **** out when its way to late lol.
I only plan on running around 5lbs of boost so nothing crazy.
Thanks again!
#2
ALLROTOR
iTrader: (2)
Why not try a 2nd Gen TurboII turbo. Yea it doesn't answer your question in regards to a T4 flange but there are plenty of threads in the first gen section on how to make a stock TurboII exhaust manifold fit a 12A. Also it wouldn't be hard to take the flange off any tubular manifold and make a flange to match the TurboII turbo.
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM