What size injectors would you suggest for primaries and secondaries on a single turbo set up?

 

Buler, Buler? Anyone? I'm just trying to see where I stand with my set up.

 

Depends on alot.. If you could list your setup and how much hp you're looking for it would help.

 

850 primaries, 1600 secondaries, xs single(equivelant to t-66), greddy 3 row ic, hks wasegate, apex bv, street port motor by Hays, 3 mm apex seals, Jacobs ignition. Sometimes car will start and sometimes it won't. When it does it only stays on for about 10 minutes and then dies. Did compression check at Rotary Performance and both rotors were low. Called Hays and they said motor needs to be broken in and it will build compression.

 

That may be true , I expeienced similar **** with my half bridged REW, had to tow start the first time (after frustrating myself for days , thanks for the advice guys) , let it idle for about half hour then it started up and idled every time after effortlessly.

 

Those injectors are fine for 600+hp at the wheels.

 

Damn it takes a while for a response in here. AJC13B, thanks for the reply. So what would you suggest? Should I step it down a little?

 

It sounds like you have already done 850's and 1600's. That is fine for your setup, but needs to be tuned.

Jason
www.rx7store.net

 

I suggest what Jason suggested