This the turbo for me?
#1
Senior Member
Thread Starter
Join Date: Aug 2002
Location: San Jose, California
Posts: 513
Likes: 0
Received 0 Likes
on
0 Posts
This the turbo for me?
I have a 1991 T2 and I am looking for a single turbo, i found this one on cheapturbo.com
COMPRESSOR SPECS:T04S
.70 A/R HOUSING
60 TRIM WHEEL
TURBINE SPECS:T4
.84 A/R TANGENTILE HOUSING
V-BAND DISCHARGE
oil lubricated centersection. for use with external wastegate
$725.00
Anybody know if this is divided or undivided? Is this too big for a stock port 13bt? I am looking for 400rwhp with good spool, i think i would sooner go smaller with less power than more power/slower spool. This is almost all street driven.
COMPRESSOR SPECS:T04S
.70 A/R HOUSING
60 TRIM WHEEL
TURBINE SPECS:T4
.84 A/R TANGENTILE HOUSING
V-BAND DISCHARGE
oil lubricated centersection. for use with external wastegate
$725.00
Anybody know if this is divided or undivided? Is this too big for a stock port 13bt? I am looking for 400rwhp with good spool, i think i would sooner go smaller with less power than more power/slower spool. This is almost all street driven.
#2
Banned. I got OWNED!!!
Join Date: Sep 2001
Location: Pensacola, FL
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
A .84 tangenal housing is a divided housing.I personally feel the turbine side is to small, but opinions on that will vary. I will be going with a 60-1, P trim exhaust and a .96 undivided hotside. With a divided hotside I would reccomend atleast a 1.0 exhaust A/R.
Daniel
Daniel
#5
Rotary Enthusiast
iTrader: (2)
Join Date: Sep 2001
Location: Altadena, CA
Posts: 932
Likes: 0
Received 0 Likes
on
0 Posts
That looks like a good turbo for your goals. 1FastT2 is running a .84 divided housing (it is divided btw) on his streetport motor, and is putting down a lot of power / running 11.8 in the 1/4 mile at 15psi of boost (I believe that's his boost level).
Good price too!
Good price too!
Thread
Thread Starter
Forum
Replies
Last Post