what do i need for a 10 second pass?
07-25-02, 05:57 AM
#1
Senior Member
Thread Starter
Join Date: Nov 2001
Location: Qatar
Posts: 579
Likes: 0
Received 0 Likes
on
0 Posts
what do i need for a 10 second pass?
i tried searching but i couldn't find enough info.
i have every bolt on other than a single turbo and bigger injectors. what turbo is good for a 10 second pass? and is a mild port enough or do i need a big port?
i have every bolt on other than a single turbo and bigger injectors. what turbo is good for a 10 second pass? and is a mild port enough or do i need a big port?
07-25-02, 04:49 PM
#7
Senior Member
Thread Starter
Join Date: Nov 2001
Location: Qatar
Posts: 579
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 93redFD
390-420 rwhp should get you a 10, if you go single you might want to have a heavier streetport done...
390-420 rwhp should get you a 10, if you go single you might want to have a heavier streetport done...
Trending Topics
07-25-02, 05:05 PM
#8
Rotary Enthusiast
Join Date: Feb 2001
Location: The First State
Posts: 1,375
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by zooq
i'm doing 360whp now at 15 psi, on my stock twins and stock ports. my mods are in my sig.
i'm doing 360whp now at 15 psi, on my stock twins and stock ports. my mods are in my sig.
07-25-02, 06:23 PM
#9
Full Member
Join Date: Jan 2002
Location: Canada
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
360 rwhp @ 15psi is pretty good for stock twins on stock ports though. Around 400-425 rwhp will get you in the 10s, but if you want to do it over and over all day long, you'll need 450rwhp as Greg mentioned.
07-25-02, 07:14 PM
#10
Part out my Car
Join Date: Feb 2002
Location: Denver, Colorado
Posts: 1,762
Likes: 0
Received 0 Likes
on
0 Posts
and a new rear end, slicks, axle. Cause you can have all the power in the world but if you cant get it down to the ground then your just another pawn.
marc
marc
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
09-16-15 09:07 PM