Speedworks

I'm looking for some pictures off extra fuel injector setups. Preferably setups with injectors on the UIM or LIM.

If possible with some info on where you got the parts, what to look out fo (angle in the intake path), pointers too look out for

thanks a lot

Speedworks

up... nobody??

PvillKnight7

iTrader: (16)

Additional injectors are not used exclusively on RX-7 engines. Try searching the world wide web.

Syritis

iTrader: (2)

notice the two injectors on the greddy compression tube. a simple 5/16 rubber hose and hose clamps will hold stock pressure but i wouldn't trust it at higher boost levels.
these should be plumbed in with a Y fitting after the fuel filter and should have a pulsation dampener then Y'd again to each injector. this is why is not really practical for our cars when it much easier to increase the size of the injectors in the stock locations.

NewbernD

iTrader: (1)

Here's a pic of a spacer that went between your UIM and LIM and provided for additional injectors. I have seen a similar unit show upon eBay that provided for 8 injectors..




and another pic of injectors in the elbow..

elwood

iTrader: (1)

Check the Single Turbo forum.

elwood

iTrader: (1)

Oops -- thought I was on a different forum.

Have you searched for Ground Zero? I think they used to make a LIM with extra injector bosses.