Wanted:pics off extra fuel injector setups
 

I'm looking for some pictures off extra fuel injector setups. Preferably setups with injectors on the UIM or LIM.

If possible with some info on where you got the parts, what to look out fo (angle in the intake path), pointers too look out for

thanks a lot

up... nobody??

Additional injectors are not used exclusively on RX-7 engines. Try searching the world wide web.

http://photos-d.ak.fbcdn.net/hphotos..._2520977_n.jpg
notice the two injectors on the greddy compression tube. a simple 5/16 rubber hose and hose clamps will hold stock pressure but i wouldn't trust it at higher boost levels.
these should be plumbed in with a Y fitting after the fuel filter and should have a pulsation dampener then Y'd again to each injector. this is why is not really practical for our cars when it much easier to increase the size of the injectors in the stock locations.

aux injectors
 

Here's a pic of a spacer that went between your UIM and LIM and provided for additional injectors. I have seen a similar unit show upon eBay that provided for 8 injectors..


http://dave.newbern.org/rx7/fuelrail...linjection.jpg

and another pic of injectors in the elbow..

http://dave.newbern.org/rx7/fuelrail..._13057381.jpeg

Check the Single Turbo forum.

Oops -- thought I was on a different forum.

Have you searched for Ground Zero? I think they used to make a LIM with extra injector bosses.