Very handy free program for unit conversion
#1
Very handy free program for unit conversion
So I stumbled upon a nice "all in one" unit conversion program that can deal with all the various units associated with turbochargers. It's called Uconeer and it is free from Katmar software.
http://www.katmarsoftware.com/uconflow.htm
Here I am converting kg/s (Borg Warner compressor map unit) to lb/min (Garrett compressor map unit), which are both mass flow units:
You can see that on the upper right there is an icon you can click to convert from volume airflow to mass airflow. Here I am converting cfm (ft^3/min) to lb/min at 1 atmosphere barometric pressure and ambient temperature of 20C/68F:
Here I am converting Mazda's spec on the max volume airflow of the Cosmo 20B airflow meter to a mass flow in lb/min:
I hope some of you find this program useful.
http://www.katmarsoftware.com/uconflow.htm
Here I am converting kg/s (Borg Warner compressor map unit) to lb/min (Garrett compressor map unit), which are both mass flow units:
You can see that on the upper right there is an icon you can click to convert from volume airflow to mass airflow. Here I am converting cfm (ft^3/min) to lb/min at 1 atmosphere barometric pressure and ambient temperature of 20C/68F:
Here I am converting Mazda's spec on the max volume airflow of the Cosmo 20B airflow meter to a mass flow in lb/min:
I hope some of you find this program useful.
#2
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,805
Received 2,578 Likes
on
1,831 Posts
that was a great find
Thread
Thread Starter
Forum
Replies
Last Post
edmcguirk
NE RX-7 Forum
3
05-30-18 06:50 PM
The1Sun
1st Generation Specific (1979-1985)
0
09-07-15 10:21 PM