Turbocharger Oil Seal Leakage Explained
#53
Hi,
I am running on stock twin setup on my fd.
My primary turbo leaks oil at the compressor side after running few laps in a track event.
Oil was spraying through my bov, and my intercooler is full of oil.
1) is it possible if the seal fails and the bearings are still in good condition? Explaination?
2) or will the damaged bearings affect the seal to fail?
3) How do we know if the bearing is bad? Any specific measurement or clearance data on the shaft radial and axial play?
Looking forward for advices.
Thanks
I am running on stock twin setup on my fd.
My primary turbo leaks oil at the compressor side after running few laps in a track event.
Oil was spraying through my bov, and my intercooler is full of oil.
1) is it possible if the seal fails and the bearings are still in good condition? Explaination?
2) or will the damaged bearings affect the seal to fail?
3) How do we know if the bearing is bad? Any specific measurement or clearance data on the shaft radial and axial play?
Looking forward for advices.
Thanks
#54
Can Post Only in New Member Section
Join Date: Feb 2017
Location: Boise
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Definitely stay away from ebay for turbos. Anybody can take apart a turbo and put it back together but that doesn't mean the turbo is good again (as you pointed out).
I've never worked with carbon face compressor seals but instead of using a torturous path with a piston ring, they are made of carbon for low friction and create a positive seal (makes physical contact to seal). This can be used for applications when compressor pressures are really low (like if you have to mount your compressor stage post throttle body). Unfortunately these seals aren't the best for performance since they have more drag.
I've never worked with carbon face compressor seals but instead of using a torturous path with a piston ring, they are made of carbon for low friction and create a positive seal (makes physical contact to seal). This can be used for applications when compressor pressures are really low (like if you have to mount your compressor stage post throttle body). Unfortunately these seals aren't the best for performance since they have more drag.
Thread
Thread Starter
Forum
Replies
Last Post