Building turbo 12a, here's the info, let me know if i missed or need to change anything
Fitech fuel pump, Fitech pre post filter
AN high pressure fuel lines to and from hardlines
Fitech Efi go street 4 power adder
Racing beat holley intake
Heat shield
Side seal .0025 clearance
Mazdatrix bridgeport
Racing beat race exhaust port
all new springs, bearings, gaskets, oil o'rings, purple paint
AN oil cooler lines
3 shims, fd spring, fd rear reg (do i need a better oil pump for 100+psi)
Lower temp thermostat
Champion radiator with fans
fc water pump(does that bolt right to the 12a wp housing?)
Oil temp and pressure filter pedestal adapter
Custom turbo manifold
What should i do for turbo feed and drain, can i drain through the filler neck breather?
dual port wastegate 11 psi max prolly
Gt3788VA(weird but its what i got)
custom exhaust
Cone filter
3 inch core intercooler that fits In front of rad
Blow off valve
boost ref
Turbo hat
lots of premix
no fuel cut on ecu
what kind of plug should i run?
Ignition setup is stock unless i change it, no vacuum advance ecu should take care of most of it
do i need more powerful coils
Gauges for everything
Custom turbo controller
TPS
RPM sensor
Let me know if anything needs changed, I had a better list but i got signed out and it deleted it and now im mad