veilsidefd3

i am currently having a to4s installed on my 93 r1. no porting, 1300 cc secondaries, pfc, m2 large stock mount. steve kaan is to tune my car, what hp can i expect from about 14 or 15 psi.

does anyone have a similair setup?

by the way, i did a search and couldnt get the exact answer i am looking for. In case one of the pissed off at the world people feel like posting "do a search newbie" i will have beat you to it.

thanks,

Wargasm

From my page at http://www.catenet.net/dyno.php

Shawn from www.3rdgenrx7.com made around 320 rear wheel hp at 13 PSI and Conv.WS6 (his username on this forum) made around 365 rwhp at 16 PSI on stock ports.

veilsidefd3

i heard about 400 at 15psi with a street port. does a street port make that big of a difference? i was hoping to make about 390 rwhp. this is disappointing i guess i will get a street port on the next motor.

Wargasm

A street port does make a good difference on a decent sized single like a T04S. 400@15 with a street port is definitely possible. Myself and others have done it.

Brian

veilsidefd3

i wish i would have done a bit more research before dumping my savings on a turbo system just to find out i will be short about 30 rwhp. there are too many nitrous ls1 and 03 cobras around here and 350hp is not going to compete.
thanks for the info.

veilsidefd3

by the way wich types of dynos were used on those cars, because i have heard that all dynos dont actually read alike? I heard dynojets show the highest #