to4s with stock port
i am currently having a to4s installed on my 93 r1. no porting, 1300 cc secondaries, pfc, m2 large stock mount. steve kaan is to tune my car, what hp can i expect from about 14 or 15 psi.
does anyone have a similair setup? by the way, i did a search and couldnt get the exact answer i am looking for. In case one of the pissed off at the world people feel like posting "do a search newbie" i will have beat you to it. thanks, |
From my page at http://www.catenet.net/dyno.php
Shawn from www.3rdgenrx7.com made around 320 rear wheel hp at 13 PSI and Conv.WS6 (his username on this forum) made around 365 rwhp at 16 PSI on stock ports. |
i heard about 400 at 15psi with a street port. does a street port make that big of a difference? i was hoping to make about 390 rwhp. this is disappointing i guess i will get a street port on the next motor.
|
A street port does make a good difference on a decent sized single like a T04S. 400@15 with a street port is definitely possible. Myself and others have done it.
Brian |
i wish i would have done a bit more research before dumping my savings on a turbo system just to find out i will be short about 30 rwhp. there are too many nitrous ls1 and 03 cobras around here and 350hp is not going to compete.
thanks for the info. |
by the way wich types of dynos were used on those cars, because i have heard that all dynos dont actually read alike? I heard dynojets show the highest #
|
All times are GMT -5. The time now is 04:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands